Melissa 246-006: FOR BEST RESULT ENVIRONMENTAL TIP TO CLEAN THE WARRENTY DO NOT COVER: Importer: STORAGE

TSK-962_rev_IM 14/10/03 16:09 Side 11

the slice thickness adjustment knob back to

FOR BEST RESULT

0. The slicer can be used to cut meat, ham,

- To slice meats wafer thin, chill thoroughly

sausages, bread, vegetables or cheese. Put

before slicing.

the food plate onto the feeder. Place the

- Meats should be boneless. Fruits should be

food between the food plate and the

free of seeds.

supporting plate. Then push the feeder

- Foods with an uneven texture - like fish and

forwards towards the blade. Move the

thin steaks - are often difficult to slice.

feeder back and forward. Hold the food

Partially freeze before slicing.

plate against the blade without pushing, to

- At canning time, use the slicer to quickly cut

ensure equal sized pieces.

cucumbers and onions for attractive

- Always use food carriage and food pusher

pickles. Apples for pies. Vegetables for the

- The electrical voltage must correspond with

freezer.

the voltage stated on the label at the

bottom of the appliance.

ENVIRONMENTAL TIP

- When finishing slicing, unplug the unit. For

An electronic appliance should, when it is no

safety and blade protection when storing,

longer capable of functioning be disposed of

turn thickness adjusting knob to 0.

with least possible environmental damage and

according to the local regulations in your

TO CLEAN

municipality In most cases you can discharge

- Unplug slicer from outlet.

the appliance at your local recycling center.

- Adjust the slice thickness adjustment knob

to position before cleaning. At this position

THE WARRENTY DO NOT COVER:

the supporting plate can be pulled out for

- if the above points have not been observed.

easier cleaning.

- if the appliance has not been properly

- Always take off the blade and clean first. To

maintained, if force has been used against it

clean the blade; release the knife blade, by

or if it has been damaged in any other way.

turning the holder with the supplied tool.

- errors of faults owing to defects in the

Take out the blade by gripping the hole of

distribution system.

the blade.

- if the appliance has been repaired or

- The blade, food press plate, feeder, and

modified or changed in any way or by any

food tray can be washed with a soft cloth or

person not properly authorized.

sponge and a mild soap or a spray cleaner.

- Clean the outer surface of the motor

Importer:

assembly with a damp cloth only. Never

Adexi A/S

immerse the slicer in water. Motor never

Adexi AB

needs oiling

- Never use steel wool or scouring powder on

We take reservations for printing errors.

any part of the slicer.

- After cleaning, install the blade and blade

locking knob on motor assembly. Make sure

the blade locking knob is properly engaged.

STORAGE

- Set the slice thickness adjustment knob to 0

position.

- The appliance should be stored away from

children in a dry place.

11