Melissa 245-014: PRODUCT DESCRIPTION: CORDLESS KETTLE: INSTRUCTIONS FOR USE: HOW TO CARE FOR YOUR KETTLE:

245014 IM 25/02/03 11:09 Side 14

PRODUCT DESCRIPTION:

CORDLESS KETTLE:

1. Spout

2

- Place the power base on a dry, flat surface.

2. Lid

1

- Place the kettle on the power base. The

3. Water level

3

electrical connections will be made

indicator

automatically as the kettle slides onto the

4

4. Control lamp

power base.

5. On/Off button

5

- Plug the cord into an eathed power socket

6. Contact

6

and switch on by depressing the switch of

7

the kettle to the "down" position.

7. Base with cord

storage

- When the water has boiled, the kettle will

switch off automatically. After allowing the

INSTRUCTIONS FOR USE:

kettle to cool down for 30 seconds, the water

can be brought back to the boil by pushing

- Before first use, fill the kettle with clean water

the switch back to the "down" position.

to maximum capacity and boil. Discard the

During the cooling down time do not force

water and repeat.

the on/off switch into the "down" ("ON")

- The kettle should always be unplugged when

position as this can damage the operating

filling or adding water.

mechanism.

- Fill the kettle with water to the desired level.

- Do not remove the kettle from the power-

Do not overfill or there will be a risk of

base without first switching off.

spillage or spitting. The water level indicator

- The kettle may be switched off at any time

will assist you to measure correct amount.

by either pushing the switch of the kettle to

You can fill the kettle via the spout or after

the "up" position or by switching the power

opening the lid. Do not forget to close the lid

off at the power outlet.

after filling otherwise the kettle will not

automatically switch off after use.

-To pour water, lift the kettle from the power

base and pour.

- Do not fill with less that 0,35 litre of water.

- Do not fill with more than 1,2 litres of water

HOW TO CARE FOR YOUR KETTLE:

(up to "MAX" indication).

Wipe the exterior of the kettle with a soft, damp

- An automatic safety cut-out has been fitted

cloth or sponge. Remove stubborn spots with a

for protection against overheating. It will

cloth moistened with mild liquid detergent. Do not

operate if the kettle is switched on when

use abrasive scouring pads or powders. Never

containing insufficient water.

immerse the kettle in water or other liquids.

- If the automatic safety cut-out has operated,

Since this kettle has concealed heating element,

switch the kettle off, disconnect from the

is it important to keep the bottom clean, between

power outlet and allow the kettle to cool

the decalcification you may use a washing-up

down for 5- 10 minutes. Then refill with water

brush or sponge.

and switch on - the kettle will then boil and

From time to time, dependent on the nature of

cut off as in normal operation.

your water supply, a limescale deposit is naturally

- The kettle may be switched off at any time

formed and can be found mostly adhered to the

by either pushing the switch of the kettle to

heating element and reduce the heating capacity.

the "up" position or by switching the power

The amount of limescale deposited (and

off at the power outlet.

subsequently the need to clean or descale) largely

-To pour water, lift the kettle from the power

depends on the water hardness in your area and

base and pour

the frequency with which the kettle is used.

14