LG 42LB700V – page 30
Manual for LG 42LB700V
SPECIFICATIONS
B-3
47LB65**
47LB650V-ZA
MODELS
47LB650V-ZE
47LB651V-ZA
47LB653V-ZK
47LB650V-ZN
47LB652V-ZA
Dimensions
With stand (
mm
)
1072 x 677 x 247 1072 x 675 x 230 1072 x 669 x 267
(W x H x D)
Without stand(
mm)
1072 x 629 x 54.5 1072 x 629 x 54.5 1072 x 629 x 54.5
Weight With stand (kg)
13.4 13.3 16.2
Without stand (kg)
13.0 13.0 13.0
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
110 W 110 W 110 W
50LB65**
50LB650V-ZA
MODELS
50LB650V-ZE
50LB651V-ZA
50LB653V-ZK
50LB650V-ZN
50LB652V-ZA
Dimensions
With stand (
mm
)
1127 x 710 x 247 1127 x 706 x 230 1127 x 699 x 267
(W x H x D)
Without stand(
mm)
1127 x 660 x 54.5 1127 x 660 x 54.5 1127 x 660 x 54.5
Weight With stand (kg)
14.7 14.6 17.5
Without stand (kg)
14.3 14.3 14.3
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
120 W 120 W 120 W
55LB65**
55LB650V-ZA
MODELS
55LB650V-ZE
55LB651V-ZA
55LB653V-ZK
55LB650V-ZN
55LB652V-ZA
Dimensions
With stand (
mm
)
1241 x 772 x 247 1241 x 769 x 230 1241 x 765 x 293
(W x H x D)
Without stand(
mm)
1241 x 725 x 55.5 1241 x 725 x 55.5 1241 x 725 x 55.5
Weight With stand (kg)
18.7 18.6 22.8
Without stand (kg)
18.3 18.3 18.3
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 130 W 130 W
60LB65** 70LB65**
MODELS
70LB650V-ZA
60LB650V-ZN
70LB650V-ZB
Dimensions
With stand (
mm
)
1351 x 828 x 293 1574 x 970 x 314
(W x H x D)
Without stand(
mm)
1351 x 788 x 57.5 1574 x 919 x 60.2
Weight With stand (kg)
26.3
31.6
Without stand (kg)
21.8
30.1
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 260 W
B-4
SPECIFICATIONS
42LB67** 47LB67** 50LB67**
42LB670V-ZA
47LB670V-ZA
50LB670V-ZA
42LB671V-ZB
47LB671V-ZB
50LB671V-ZB
42LB671V-ZF
47LB671V-ZF
50LB671V-ZF
MODELS
42LB673V-ZB
47LB673V-ZB
50LB673V-ZB
42LB675V-ZA
47LB675V-ZA
50LB675V-ZA
42LB677V-ZC
47LB677V-ZC
50LB677V-ZC
42LB679V-ZF
47LB679V-ZF
50LB679V-ZF
Dimensions
With stand (
mm
)
948.2 x 606.9 x 210.9
1059.9 x 671.9 x 247.5
1116.1 x 704.9 x 247.5
(W x H x D)
Without stand(
mm)
948.2 x 558.2 x 55.1 1059.9
x
621
x
55.1
1116.1 x 652.9 x 55.1
Weight With stand (kg)
10.4
13.2
14.6
Without stand (kg)
10.0
12.7 14.1
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
95 W 100 W 110 W
55LB67** 42LB68** 47LB68**
55LB670V-ZA
55LB671V-ZB
55LB671V-ZF
MODELS
42LB680V-ZA
47LB680V-ZA
55LB673V-ZB
42LB680V-ZD
47LB680V-ZD
55LB675V-ZA
55LB677V-ZC
55LB679V-ZF
Dimensions
With stand (
mm
)
1229.8 x 767.5 x 247.5 949 x 608 x 211
1061 x 670 x 247
(W x H x D)
Without stand(
mm)
1229.8 x 716.6 x 55.1 949 x 560 x 55.1
1061 x 623 x 55.1
Weight With stand (kg)
18.5 10.4 13.3
Without stand (kg)
18 10 12.8
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 95 W 100 W
55LB68** 60LB68** 65LB68**
MODELS
55LB680V-ZA
60LB680V-ZA
65LB680V-ZA
55LB680V-ZD
60LB680V-ZD
65LB680V-ZD
Dimensions
With stand (
mm
)
1231 x 769 x 247
1338.4 x 834.7 x 288.9 1449.5 x 883.7 x 313.9
(W x H x D)
Without stand(
mm)
1231 x 718 x 55.1 1338.4 x 778.8 x 58.1
1449.5 x 840.8 x 58.1
Weight With stand (kg)
19 22.2 27.9
Without stand (kg)
18.5 21.3 26.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 140 W 160 W
SPECIFICATIONS
B-5
42LB69** 47LB69** 55LB69**
MODELS
42LB690V-ZA
47LB690V-ZA
55LB690V-ZA
42LB690V-ZC
47LB690V-ZC
55LB690V-ZC
Dimensions
With stand (
mm
)
949 x 608 x 211 1061 x 670 x 247 1231 x 769 x 247
(W x H x D)
Without stand(
mm)
949 x 560 x 55.1 1061 x 623 x 55.1 1231 x 718 x 55.1
Weight With stand (kg)
10.4 13.3 19
Without stand (kg)
10 12.8
18.5
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
95 W
100 W 130 W
42LB70** 47LB70** 55LB70**
MODELS
42LB700V-ZG 47LB700V-ZG 55LB700V-ZG
Dimensions
With stand (
mm
)
948.2 x 608 x 213 1059.9 x 666 x 227 1229.8 x 761 x 244
(W x H x D)
Without stand(
mm)
948.2 x 558.2 x 55.1 1059.9 x 621 x 55.1 1229.8 x 716.6 x 55.1
Weight With stand (kg)
10.8 13.6 19.1
Without stand (kg)
10 12.7 18
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
95 W 100 W 130 W
42LB72**
MODELS
42LB720V-ZA
42LB720V-ZG
42LB720V-ZB
Dimensions
With stand (
mm
)
949 x 608 x 211
949 x 608 x 213
(W x H x D)
Without stand(
mm)
949 x 560 x 55.1
949 x 560 x 55.1
Weight With stand (kg)
10.4 10.7
Without stand (kg)
10 10
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
95 W 95 W
47LB72**
MODELS
47LB720V-ZA
47LB720V-ZG
47LB720V-ZB
Dimensions
With stand (
mm
)
1061 x 670 x 247 1061 x 666 x 227
(W x H x D)
Without stand(
mm)
1061 x 623 x 55.1 1061 x 623 x 55.1
Weight With stand (kg)
13.3 13.7
Without stand (kg)
12.8 12.8
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W 100 W
B-6
SPECIFICATIONS
55LB72**
MODELS
55LB720V-ZA
55LB720V-ZG
55LB720V-ZB
Dimensions
With stand (
mm
)
1231 x 769 x 247 1231 x 766 x 237
(W x H x D)
Without stand(
mm)
1231 x 718 x 55.1 1231 x 718 x 55.1
Weight With stand (kg)
19 19.6
Without stand (kg)
18.5 18.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 130 W
60LB72**
MODELS
60LB720V-ZA
60LB720V-ZG
60LB720V-ZB
Dimensions
With stand (
mm
)
1338.4 x 834.7 x 288.9 1338.4 x 826.2 x 268.4
(W x H x D)
Without stand(
mm)
1338.4 x 778.8 x 58.1 1338.4 x 778.8 x 58.1
Weight With stand (kg)
22.2 22.6
Without stand (kg)
21.3 21.3
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
140 W
140 W
65LB72**
MODELS
65LB720V-ZA
65LB720V-ZG
65LB720V-ZB
Dimensions
With stand (
mm
)
1449.5 x 883.7 x 313.9 1449.5 x 894.4 x 293.1
(W x H x D)
Without stand(
mm)
1449.5 x 840.8 x 58.1 1449.5 x 840.8 x 58.1
Weight With stand (kg)
27.9 27.9
Without stand (kg)
26.5 26.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
160 W 160 W
SPECIFICATIONS
B-7
42LB73**
42LB730V-ZD
MODELS
42LB730V-ZA
42LB730V-ZE
42LB731V-ZE
Dimensions
With stand (
mm
)
949 x 608 x 211 949 x 608 x 213
(W x H x D)
Without stand(
mm)
949 x 560 x 55.1 949 x 560 x 55.1
Weight With stand (kg)
10.4 10.7
Without stand (kg)
10 10
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
95 W 95 W
47LB73**
47LB730V-ZD
MODELS
47LB730V-ZA
47LB730V-ZE
47LB731V-ZE
Dimensions
With stand (
mm
)
1061 x 670 x 247 1061 x 666 x 227
(W x H x D)
Without stand(
mm)
1061 x 623 x 55.1 1061 x 623 x 55.1
Weight With stand (kg)
13.3 13.7
Without stand (kg)
12.8 12.8
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W 100 W
55LB73**
55LB730V-ZD
MODELS
55LB730V-ZA
55LB730V-ZE
55LB731V-ZE
Dimensions
With stand (
mm
)
1231 x 769 x 247 1231 x 766 x 237
(W x H x D)
Without stand(
mm)
1231 x 718 x 55.1 1231 x 718 x 55.1
Weight With stand (kg)
19 19.6
Without stand (kg)
18.5 18.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W 130 W
60LB73**
60LB730V-ZD
MODELS
60LB730V-ZA
60LB730V-ZE
60LB731V-ZE
Dimensions
With stand (
mm
)
1338.4 x 834.7 x 288.9 1338.4 x 826.2 x 268.4
(W x H x D)
Without stand(
mm)
1338.4 x 778.8 x 58.1 1338.4 x 778.8 x 58.1
Weight With stand (kg)
22.2 22.6
Without stand (kg)
21.3 21.3
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
140 W 140 W
B-8
SPECIFICATIONS
65LB73**
65LB730V-ZD
MODELS
65LB730V-ZA
65LB730V-ZE
65LB731V-ZE
Dimensions
With stand (
mm
)
1449.5 x 883.7 x 313.9 1449.5 x 894.4 x 293.1
(W x H x D)
Without stand(
mm)
1449.5 x 840.8 x 58.1 1449.5 x 840.8 x 58.1
Weight With stand (kg)
27.9 27.9
Without stand (kg)
26.5 26.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
160 W 160 W
49LB86** 55LB86** 60LB86**
MODELS
49LB860V-ZA
55LB860V-ZA
60LB860V-ZA
49LB860V-ZB
55LB860V-ZB
60LB860V-ZB
Dimensions
With stand (
mm
)
1091 x 690 x 229 1227 x 769 x 229 1335 x 830 x 261
(W x H x D)
Without stand(
mm)
1091
x
632
x
34.7 1227 x 709 x 34.7 1335 x 770 x 35.7
With Sound Bar
1091
x
688
x
34.7 1227 x 765 x 34.7 1335 x 826 x 35.7
Supporter(mm)
Weight With stand (kg)
17.4 22.6 27.1
Without stand (kg)
16.7 21.9 26.2
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
120 W 130 W 140 W
49LB87** 55LB87** 60LB87**
MODELS
49LB870V-ZA 55LB870V-ZA 60LB870V-ZA
Dimensions
With stand (
mm
)
1091 x 690 x 229 1227 x 769 x 229 1335 x 830 x 261
(W x H x D)
Without stand(
mm)
1091
x
632
x
34.7 1227 x 709 x 34.7 1335 x 770 x 35.7
With Sound Bar
1091
x
688
x
34.7 1227 x 765 x 34.7 1335 x 826 x 35.7
Supporter(mm)
Weight With stand (kg)
17.4 22.6 27.1
Without stand (kg)
16.7 21.9 26.2
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power consumption
120 W 130 W 140 W
SPECIFICATIONS
B-9
CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
0 °C to 40 °C
Environment
Operating Humidity
Less than 80 %
condition
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV Analogue TV
Television system
DVB-T/T2
PAL/SECAM B/G/I/D/K
DVB-C
SECAM L/L’
DVB-S/S2
Programme coverage
VHF, UHF
VHF: E2 to E12, UHF : E21 to E69,
C-Band, Ku-Band
CATV: S1 to S20, HYPER: S21 to
S47
Maximum number of
DVB-S/S2 : 6,000
storable programmes
DVB-T/T2/C & Analogue TV : 1,500
External antenna impedance 75 Ω
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
LG Customer Information Centre
Country
Service
Country
Service
0 810 144 131 0900 543 5454
015 200 255 800 187 40
0032 15 200255 801 54 54 54
07001 54 54 808 78 54 54
Record the model number and serial number of
810 555 810 031 228 3542
the TV.
8088 5758 0850 111 154
Refer to the label on the back cover and quote
0800 0 54 54 902 500 234
this information to your dealer when requiring
3220 54
0770 54 54 54
any service.
01806-11-54-11
(0,20€ pro Anruf
aus dem Festnetz der
0848 543 543
MODEL
DTAG; Mobilfunk: max.
0,60€ pro Anruf.)
SERIAL
801 11 200 900,
0844 847 5454
210 4800 564
8 800 200 7676
06 40 54 54 54 800 9990
0818 27 6955 0 800 303 000
199600099
8 8000 805 805,
8 820 0071 1111
2255(GSM)
Latvija
80200201 8 800 120 2222
880008081 8 0000 710 005
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
2
KEY CODES
ENGLISH
KEY CODES
ENG
• This feature is not available for all models.
Code
Code
Function Note
Function Note
(Hexa)
(Hexa)
00 CH +, PR + R/C Button 53 List R/C Button
01 CH -, PR - R/C Button 5B Exit R/C Button
02 Volume + R/C Button 60 PIP(AD) R/C Button
03 Volume - R/C Button 61 Blue R/C Button
06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button
07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button
08 Power R/C Button 72 Red R/C Button
09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button
0B Input R/C Button 91 AD (Audio Description) R/C Button
0E SLEEP R/C Button 7A User Guide R/C Button
0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button
10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button
1A Q.View / Flashback R/C Button 8E ►►(Forward) R/C Button
1E FAV (Favorite Channel) R/C Button 8F ◄◄(Rewind) R/C Button
20 Text (Teletext) R/C Button AA Info R/C Button
21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button
28 Return (BACK) R/C Button B0 ►(Play) R/C Button
30 AV (Audio / Video) Mode R/C Button B1 ꕗ (Stop / File List) R/C Button
ꕘ (Freeze / Slow Play /
39 Caption/Subtitle R/C Button BA
R/C Button
Pause)
40 Λ
(Arrow Key / Cursor Up)
R/C Button BB Soccer R/C Button
V (Arrow Key / Cursor
41
R/C Button BD ꔄ (REC) R/C Button
Down)
42 My Apps R/C Button DC 3D R/C Button
43 Menu / Settings R/C Button 99 AutoConfig R/C Button
44 OK / Enter R/C Button 9F App / * R/C Button
45 Q.Menu R/C Button
4C List, - (ATSC Only) R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
3
EXTERNAL CONTROL DEVICE SETUP
ENGENGLISH
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB Type
(TV)
USB IN
(PC )
(PC )
(PC )
(PC )
3
3
(CONTROL & SERVICE)
2
2
RS-232C IN
1
1
(CONTROL & SERVICE)
(CONTROL & SERVICE)
RS-232C IN
RS-232C IN
SERVICE ONLY
(TV)
(TV)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
RS-232C With RS232C Cable
DE9 (D-Sub 9pin) Type
• You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.
(TV)
USB IN
(PC )
(PC )
RS-232C IN
(CONTROL & SERVICE)
(TV)
(PC )
(PC )
3
3
(CONTROL & SERVICE)
2
2
RS-232C IN
1
1
(CONTROL & SERVICE)
RS-232C IN
SERVICE ONLY
(TV)
(TV)
The connection interface may differ from your TV.
4
4
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
Phone jack Type
ENG
• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and
the TV, which is specified in the manual.
* For other models, connect to the USB port.
* The connection interface may differ from your TV.
(PC )
(TV)
USB IN
RS-232C IN
(CONTROL & SERVICE)
(PC )
(TV)
(PC )
(TV)
(PC )
(TV)
SERVICE ONLY
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
1
3
2
3
2
1
- or
(PC )
(TV)
USB IN
RS-232C IN
(CONTROL & SERVICE)
(PC )
(TV)
(PC )
(TV)
(TV)
(PC
)
SERVICE ONLY
RS-232C IN
(CONTROL & SERVICE)
1
3
2
(CONTROL & SERVICE)
RS-232C IN
1
3
2
Customer Computer RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC TV
RXD 2 2 TXD
TXD 3 1 RXD
GND 5 3 GND
6
9
OR
RS-232C
RXD 3 2 TXD
(Serial port)
TXD 2 1 RXD
GND 5 3 GND
D-Sub 9 Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)
EXTERNAL CONTROL DEVICE SETUP
5
5
Communication Parameters
ENGENGLISH
• Baud rate : 9600 bps (UART)
• Stop bit : 1 bit
• Data length : 8 bits
• Communication code : ASCII code
• Parity : None
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
DATA
DATA
COMMAND1 COMMAND2
COMMAND1 COMMAND2
(Hexadecimal)
(Hexadecimal)
01. Power* k a 00 to 01 15. Balance k t 00 to 64
16. Color
02. Aspect
k c (p.7)
(Colour)
x u 00 to 64
Ratio
Temperature
17. ISM
03. Screen
k d (p.7)
Method (Only
j p (p.8)
Mute
Plasma TV)
04. Volume
k e 00 to 01 18. Equalizer j v (p.8)
Mute
05. Volume
19. Energy
k f 00 to 64
j q 00 to 05
Control
Saving
20. Tune
06. Contrast k g 00 to 64
m a (p.9)
Command
21. Channel
m b 00 to 01
07.
k h 00 to 64
(Programme)
Brightness
Add/Del(Skip)
08. Color/
k i 00 to 64 22. Key m c Key Codes
Colour
23. Control
m g 00 to 64
Backlight,
09. Tint k j 00 to 64
Control Panel
Light
10.
24. Input
x b (p.11)
k k 00 to 32
Sharpness
select (Main)
11. OSD
25. 3D (Only
x t (p.11)
k l 00 to 01
Select
3D models)
12. Remote
26. Extended
x v (p.11)
Control Lock
k m 00 to 01
3D (Only 3D
Mode
models)
27. Auto
j u (p.12)
13. Treble k r 00 to 64
Configure
14. Bass k s 00 to 64
* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
6
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
Transmission / Receiving Protocol
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ] : Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254
01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255
... ... ...
0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256
... ... ...
0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999
... ... ...
EXTERNAL CONTROL DEVICE SETUP
7
7
* Commands may work differently depending on model and signal.
ENGENGLISH
01. Power (Command: k a)
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
► To control Power *On or Off of the set.
* In case of video mute on only, TV will display On
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
Data 00 : Power Off 01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
► To Show TV is Power On or *Off
► To control volume mute on/off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
You can also adjust mute using the MUTE button
on remote control.
Ack [a][ ][Set ID][ ][OK][Data][x]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
* Similarly, if other functions transmit ‘FF’ data
Data 00 : Volume mute on (Volume off)
based on this format, Acknowledgement feedback
01 : Volume mute off (Volume on)
presents status about each function.
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c)
(Main Picture Size)
05. Volume Control (Command: k f)
► To adjust the screen format. (Main picture format)
► To adjust volume.
You can also adjust the screen format using the
You can also adjust volume with the volume
Aspect Ratio in the Q.MENU. or PICTURE menu.
buttons on remote control.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Data 01 : Normal screen
07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
06. Contrast (Command: k g)
(Latin America
(Europe, Colombia, Mid-
► To adjust screen contrast.
except Colombia
East, Asia except South
You can also adjust contrast in the PICTURE
Only)
Korea and Japan)
menu.
06 : Set by Program/
10 to 1F : Cinema Zoom 1
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Original
to 16
Data Min : 00 to Max : 64
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
07. Brightness (Command: k h)
Just Scan is available.
► To adjust screen brightness.
* Full wide mode may work differently based on
You can also adjust brightness in the PICTURE
model and is supported for DTV fully, and ATV,
menu.
AV partially.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
03. Screen Mute (Command: k d)
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
08. Color/Colour (Command: k i)
Data 00 : Screen mute off (Picture on)
Video mute off
► To adjust the screen Color(Colour).
01 : Screen mute on (Picture off)
You can also adjust colour in the PICTURE menu.
10 : Video mute on
Transmission [k][i][ ][Set ID][ ][Data][Cr]
8
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
Data Min : 00 to Max : 64
* (Depending on model)
ENG
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
14. Bass (Command: k s)
09. Tint (Command: k j)
► To adjust Bass.
► To adjust the screen tint.
You can also adjust in the AUDIO menu.
You can also adjust tint in the PICTURE menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Data Red : 00 to Green : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)
15. Balance (Command: k t)
10. Sharpness (Command: k k)
► To adjust balance.
► To adjust the screen sharpness.
You can also adjust balance in the AUDIO menu.
You can also adjust sharpness in the PICTURE
Transmission [k][t][ ][Set ID][ ][Data][Cr]
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
16. Color(Colour) Temperature (Command: x u)
► To adjust colour temperature. You can also adjust
11. OSD Select (Command: k l)
Color(Colour) Temperature in the PICTURE menu.
► To select OSD (On Screen Display) on/off when
Transmission [x][u][ ][Set ID][ ][Data][Cr]
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Data 00 : OSD off 01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
17. ISM Method (Command: j p) (Only Plasma TV)
► To control the ISM method. You can also adjust
12. Remote control lock mode (Command: k m)
ISM Method in OPTION menu.
► To lock the front panel controls on the monitor and
Transmission [j][p][ ][Set ID][ ][Data][Cr]
remote control.
Data Min : 02: Orbiter
Transmission [k][m][ ][Set ID][ ][Data][Cr]
08: Normal
20: Color(Colour) Wash
Data 00 : Lock off 01 : Lock on
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
18. Equalizer (Command : j v)
When main power is off & on (plug-off and plug-in,
► Adjust EQ of the set.
after 20 - 30 seconds), external control lock is
Transmission [j][v][ ][Set ID][ ][Data][Cr]
released.
MSB
LSB
* In the standby mode (DC off by off timer or ‘ka’,
0 0 0 0 0 0 0 0
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13. Treble (Command: k r)
Frequency Data
► To adjust treble.
You can also adjust in the AUDIO menu.
7 6 5
Frequency
4 3 2 1 0 Step
0 0 0
1st Band
0 0 0 0 0
0(decimal)
Transmission [k][r][ ][Set ID][ ][Data][Cr]
0 0 1
2nd Band
0 0 0 0 1
1(decimal)
Data Min : 00 to Max : 64
0 1 0
3rd Band
... ... ... ... ...
...
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
0 1 1
4th Band
0 0 0 1 1
19(decimal)
EXTERNAL CONTROL DEVICE SETUP
9
9
Set ID = All = 00
1 0 0
5th Band
0 0 1 0 1
20(decimal)
Data 00 & 01 = Channel Data is 10 = 00 0a
ENGENGLISH
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
* It depends on model, and can adjust when sound
mode is EQ adjustable value.
2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
19. Energy Saving (Command: j q)
Data 00 & 01 = Channel Data is 1 = 00 01
► To reduce the power consumption of the TV. You
Data 02 = Digital Antenna TV = 10
can also adjust Energy Saving in PICTURE menu.
Result = ma 00 00 01 10
Transmission [j][q][ ][Set ID][ ][Data][Cr]
3. Tune to the satellite (DVB-S) Channel 1000.
Data
Set ID = All = 00
00 : Off
Data 00 & 01 = Channel Data is 1000 = 03 E8
01 : Minimum
Data 02 = Digital Satellite TV = 40
02 : Medium
Result = ma 00 03 E8 40
03 : Maximum
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
05 : Screen off
• For South Korea, North/Latin America except
* (Depending on model)
Colombia Model
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
20. Tune Command (Command: m a)
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* This command may work differently depending on
Digital channels have a Physical, Major, and Minor
model and signal.
channel number. The Physical number is the actual
• For Europe, Mid-East, Colombia, Asia except
digital channel number, the Major is the number that
South Korea and Japan Model
the channel should be mapped to, and the Minor is
► Select channel to following physical number.
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
the Physical number is not required when sending a
[Data 01][ ][Data 02][Cr]
command in Digital.
* Analog Antenna/Cable
* Analog Antenna/Cable
Data 00 : Physical Channel Number
[Data 00][Data 01] Channel Data
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
Data 00 : High byte channel data
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 02 : Input Source (Analog)
Data 03 & 04: xx (Don't care)
- 00 : Antenna TV (ATV)
Data 05: Input Source (Analog)
- 80 : Cable TV (CATV)
- 00 : Antenna TV (ATV)
* Digital Antenna/Cable/Satellite
- 01 : Cable TV (CATV)
* Digital Antenna/Cable
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 00 : xx (Don't care)
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Input Source (Digital)
Data 02 : Low byte Channel Data
- 10 : Antenna TV (DTV)
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
- 20 : Antenna Radio (Radio)
[Data 03][Data 04]: Minor Channel Number
- 40 : Satellite TV (SDTV)
Data 03 : High byte Channel Data
- 50 : Satellite Radio (S-Radio)
Data 04 : Low byte Channel Data
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
Data 05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
* Tune Command Examples:
Number
1. Tune to the Analog antenna (PAL) Channel 10.
- 06 : Cable TV (CADTV) – Use Physical Channel
10
10
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
Number
Data 05 = Digital Antenna TV = 02
ENG
- 22 : Antenna TV (DTV) – Don’t Use Physical
Total = ma 00 00 00 11 00 01 02
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
2. Tune to the BS (ISDB-BS) channel 30.
Channel Number
Set ID = All = 00
- 46 : Cable TV (CADTV) – Use Major Channel
Data 00 = Don’t know Physical = 00
Number Only (One Part Channel)
Data 01 & 02 = Major is 30 = 00 1E
Two bytes are available for each major and minor
Data 03 & 04 = Don’t Care = 00 00
channel data, but usually the low byte is used alone
Data 05 = Digital BS TV = 07
(high byte is 0).
Total = ma 00 00 00 1E 00 00 07
* Tune Command Examples:
* This feature is varied based on the model.
1. Tune to the Analog cable (NTSC) channel 35.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
[Data 02][Data 03][Data 04][Data 05]
Data 01 & 02 = No Major = 00 00
[x][a][ ][Set ID][ ][NG][Data 00][x]
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
21. Channel(Programme) Add/Del(Skip)
2. Tune to the digital antenna (ATSC) channel 30-3.
(Command: m b)
Set ID = All = 00
Data 00 = Don’t know Physical = 00
► To skip current channel(programme) for next time.
Data 01 & 02 = Major is 30 = 00 1E
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
Total = ma 00 00 00 1E 00 03 22
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
* Set the saved channel status to del(ATSC, ISDB)/
[Data 02][Data 03][Data 04][Data 05]
skip(DVB) or add.
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
► To tune channel to following physical/major/minor
22. Key (Command: m c)
number.
► To send IR remote key code.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
Transmission [m][c][ ][Set ID][ ][Data][Cr]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Data Key code - p.2.
* Digital Antenna/Satellite
Data 00: xx (Don't care)
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
[Data 01][Data 02]: Major Channel Number
23. Control Backlight (Command: m g)
Data 01: High byte Channel Data
• For LCD TV / LED TV
Data 02: Low byte Channel Data
► To control the backlight.
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
Transmission [m][g][ ][Set ID][ ][Data][Cr]
[Data 03][Data 04]: Minor/Branch Channel Number
Data Min : 00 to Max : 64
(Don’t care in Satellite)
Data 03: High byte Channel Data
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Data 04: Low byte Channel Data
Control Panel Light (Command: m g)
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
• For Plasma TV
- 07 : BS (Broadcasting Satellite)
► To control the panel light.
- 08 : CS1 (Communication Satellite 1)
Transmission [m][g][ ][Set ID][ ][Data][Cr]
- 09 : CS2 (Communication Satellite 2)
Data Min : 00 to Max : 64
* Tune Command Examples:
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
1
Tune to the digital antenna (ISDB-T) channel 17-1
.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
EXTERNAL CONTROL DEVICE SETUP
11
11
24. Input select (Command: x b)
00 O O O
(Main Picture Input)
ENGENGLISH
01 X X X
► To select input source for main picture.
02 X X X
Transmission [x][b][ ][Set ID][ ][Data][Cr]
03 X O O
Data
X : don’t care
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
[Data03][x]
04 : ISDB-CS2 (Japan)
[t][ ][Set ID][ ][NG][Data00][x]
11 : CATV
20 : AV or AV1 21 : AV2
26. Extended 3D(Command: x v) (only 3D models)
40 : Component1
41 : Component2
(Depending on model)
60 : RGB
► To change 3D option for TV.
90 : HDMI1
91 : HDMI2
92 : HDMI3
93 : HDMI4
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
[Data 00] 3D option
* This function depends on model and signal.
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
25. 3D(Command: x t) (only 3D models)
06 : 3D Color Correction
(Depending on model)
07 : 3D Sound Zooming
08 : Normal Image View
► To change 3D mode for TV.
09 : 3D Mode (Genre)
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
[Data 01] It has own range for each 3D option
* (Depending on model)
determined by [Data 00].
Data Structure
1) When [Data 00] is 00
[Data 00] 00 : 3D On
00 : Right to Left
01 : 3D Off
01 : Left to Right
02 : 3D to 2D
03 : 2D to 3D
2) When [Data 00] is 01, 02
[Data 01] 00 : Top and Bottom
Data Min: 0 - Max: 14 (*transmit by Hexadecimal
01 : Side by Side
code)
02 : Check Board
Data value range(0 - 20) converts Viewpoint range
03 : Frame Sequential
(-10 - +10) automatically (Depending on model)
04 : Column interleaving
* This option works when 3D Mode (Genre) is manual
05 : Row interleaving
only.
[Data 02] 00 : Right to Left
01 : Left to Right
3) When [Data 00] is 06, 07
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14
00 : Off
(*transmit by Hexadecimal code)
01 : On
* [Data 02], [Data 03] functions depend on model
4) When [Data 00] is 08
and signal.
00 : Revert to 3D video from 3D-to-2D
* If [Data 00] is 00 (3D On), [Data 03] has no
converted 2D video
meaning.
01 : Change 3D video to 2D video, except
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
2D-to-3D video
01], [Data 02] and [Data 03] have no meaning.
* If conversion condition doesn’t meet, command is
* If [Data 00] is 03 (2D to 3D), [Data 01] and
treated as NG.
[Data 02] have no meaning.
5) When [Data 00] is 09
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
00 : Standard
01 : Sport
02 : Cinema
03 : Extreme
* All 3D pattern options ([Data 01]) may not be
04 : Manual
05 : Auto
available according to broadcasting/video signal.
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[Data 00] [Data 01] [Data 02] [Data 03]
[v][ ][Set ID][ ][NG][Data00][x]
12
12
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
27. Auto Configure (Command: j u)
ENG
(Depending on model)
► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
