Fein SCW16_6: Overview.

SCW 16-6

9

EN

Operating instructions for angle-headed 

driver.

Overview.

1 Tool holder

Mount the tool.

2 Selector switch for clockwise and 

anti-clockwise rotation

Select when power tool is at a 

standstill.

3 Switch

For switching ON/OFF.

4 Lubricating nipple

For lubricating drive shaft.

5 Auxiliary handle

For mounting on the left or right of the 

power tool.

6 Supplied accessories

Hexagon socket tools 

SW 13, 17, 19 (a).

Intermediate piece 1/4" (b).

Intermediate piece 5/16" (c).

Bit 1/4" PZ 4 (d).

Bit 5/16" TX 40 (e).

Auxiliary handle (f).

Carry case (g).

For your safety.

Before using this power tool, read 

and comply with:

these operating instructions,

the enclosed safety instructions 

(document number 3 41 30 054 06 1),

the relevant national industrial safety 

regulations.

These operating instructions and the 

enclosed safety information should be 

kept carefully for later use and enclosed 

with the machine, should it be passed on 

or sold.

Intended use.

This power tool is intended for:

commercial use in industry and trade,

for driving screws into/out of soft material 

such as wood.

The power tool is not suitable for screw-

driving jobs on hard material (e. g. machine 

screws). There is risk of injury when run-

ning in the screw head!

Safety instructions.

Risk of injury

Only position the power tool onto the 

screw whilst it is switched off.

Only work with the additional handle 

attached and grip the power tool firmly. 

Otherwise you could twist your wrist if 

the power tool suddenly slowed down.

Beware of any concealed electric cables, 

gas or water conduits; check the working 

area with a metal detector, for example.

Do not rivet or screw any name-plates or 

signs onto the power tool. The protective 

insulation can thereby be rendered inef-

fective. Adhesive labels are recom-

mended.

Only use an undamaged plug and cable.

Damage to property/material

Mains voltage must correspond with the 

voltage specifications on the power tool.

Personal protective equipment.

When using this power tool wear the 

following protective items:

sturdy shoes, hair net (for long hair).

!

!

SCW 16-6 - Buch  Seite 9  Montag, 18. März 2002  10:23 10