Milwaukee ROS 125 E: English

TECHNICAL DATA 

ROS 125 E ROS 150 E-2

Random Orbital Sander

Production code 4331 91 01...

4311 71 01...

4331 81 01...

4311 81 01...

... 000001-999999

... 000001-999999

Rated input 300 W 440 W

-1

-1

No-load speed 7000-12000 min

4000-10000 min

Orbital travel diameter-ø 2,4 mm ( 3/32“) 3,0 / 6,0 mm

Dimensions of grinding plate 125 mm 150 mm

Weight according EPTA-Procedure 01/2003 1,7 kg 3,0 kg

Noise/Vibration Information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K=3dB(A)) 81,0 dB (A) 83,5 dB (A)

Sound power level (K=3dB(A)) 92,0 dB (A) 94,5 dB (A)

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined according to EN 60745.

GB

2

2

Vibration emission value a

5,0 m/s

6,1 m/s

h

2

2

Uncertainty K=

1,5 m/s

1,5 m/s

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,

with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is

running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,

keep the hands warm, organisation of work patterns.

WARNING!

Before use check machine, cable, and plug for any damages or

WARNING! Read all safety warnings and all instructions,

material fatigue. Repairs should only be carried out by authorised

including those given in the accompanying brochure.

Service Agents.

Failure to follow the warnings and instructions may result in

The dust produced when using this tool may be harmful to health

electric shock, re and/or serious injury. Save all warnings and

(e.g. when working oak or beech wood, stones, paint, which could

instructions for future reference.

contain lead or other harmful chemicals). Do not inhale the dust.

Use a dust absorption system and wear a suitable dust protection

SAFETY INSTRUCTIONS

mask. Remove deposited dust thoroughly, e.g. with a vacuum

cleaner.

Wear ear protectors. Exposure to noise can cause hearing loss.

Do not use machines on any material containing asbestos.

Appliances used at many dierent locations including open air

should be connected via a residual current device (FI, RCD, PRCD) of

This machine is suitable only for dry sanding.

30mA or less.

SPECIFIED CONDITIONS O F USE

Always wear goggles when using the machine. It is recommended

to wear gloves, sturdy non slipping shoes and apron.

This eccentric sander is a versatile machine. The following work can

Only plug-in when machine is switched o.

be carried out with it: Coarse sanding and grinding, Fine sanding

and polishing, Rubbing down weather-beaten paint, Rubbing down

Always disconnect the plug from the socket before carrying out any

weather-beaten paint, Polishing up scratches on acrylic glass, Etc.

work on the machine.

Do not use this product in any other way as stated for normal use.

Keep mains lead clear from working range of the machine. Always

lead the cable away behind you.

English

9