Candy CS 105 TXT: When using your new Infotext for the first time

SET FINAL BEEP

if NO is displayed press ( )

YES

When using your new Infotext for the first time

Press ( )

This machine will operate prior to programming the Infotext set up. However, this machine has

Start Delay and Programme End functions and for these functions to work efficiently the

Infotext set must be programmed. This is a simple operation and special care has been taken

ENABLE MEMORY ?

if NO is displayed press the ( )

during manufacture to ensure that the user can operate this machine simply and effectively.

YES

Programming the machine

Press ( )

Infotext needs to be programmed so that the correct clock setting, language and personal

requirements are set. When the machine is turned on and the programme dial is moved away

SET DEMO MODE ?

always select NO, if YES press ( )

from the “off” position to the programme selections a welcome message will appear.

NO

Press ( )

WELCOME

00.00

EXIT MENU?

if NO is displayed press the ( )

YES

This message is displayed for a short time while the machine recognises which programme

has been selected. When the machine is ready, the programme details will appear on the

Press ( )

display and from here you may now beging programming the machine.

Example

COTTON WHITE

reverts back to the wash programme

10

90

HEAVY SOIL

selected

COTTON WHITE

10

90

HEAVY SOIL

You are now able to select any wash programme. You can if you wish also set a delay start.

Where more detailed information is required refer to the relevant section from the following pages.

Enter the Menu

Prior to entering the Infotext menu please note you have 30 seconds per operation to make

your selection. Should you run out of time the display will return to the start screen, and you

simply have to re-enter the Infotext menu at continue with the programming.

From this stage the menu can be programmed. Hold down the ( ) and the ( ) buttons

together for 5 seconds or until the beep sounds.

The menu options can be changed by pressing the ( ) button.

To confirm and enter an option press the ( ) button.

Setting the language

Your washing machine is automatically set to English. If you require another language (it is this

language you will read when utilising the machine) follow this procedure:

Hold down the ( ) and the ( ) buttons together for 5 seconds or until the beep sounds

to enter the Menu selection the display will then ask you to choose the desired language.

Release the ( ) and ( ) buttons and scroll through the language options by pressing

the ( ) button until you reach the language of your choice.

44

45

Release the ( ) button and press the ( ) button to enter your selection.

When you have entered your chosen language, the display will then ask for the “New time” to be set.

Enable Final Beeping

Here you have the option to have a beeping alarm to let you know the wash cycle has finished.

Set New Time

By pressing the ( ) button you can scroll through the “yes” and “no” options.

This function needs to be set for two reasons: firstly to display the current time of day on the

To enter your selection press the ( ) button and the screen will then move to the next

screen and secondly for the programme end/delay start settings to work correctly.

You will notice in the display window that the hours on the clock will be flashing.

stage and ask you to “Enable memory”

Set the hours by continually pressing the ( ) button and then press the ( ) button to enter

the hour.

Next the minutes on the clock will begin to flash, again press the ( ) button until the required

minutes are displayed and press ( ) to input the selection.

Enable Memory

When you have Set the New Time, the display will then ask if you wish to “Setting the time mode”.

This is a useful feature if you frequently wash laundry using the same programme.

Setting the time mode

Selecting “Enable Memory” will tell the machine to remember the last programme/functions

used and set them in the memory. This function works only on cottons, delicates, synthetics

There are two ways to select the time mode.

and woolens programme. The memory does not retain settings within the special programme

The first is if you wish programme end or delay start to be programmed by starting the actual

group.

time you want the programme to end or begin, e.g., programme to end 18.00. This is called

Select “Yes” or “No” to this option by using the ( ) and ( ) button to input the selection.

Absolute Time Mode.

The display will then shown a message that asks if you require demo mode to be set.

When utilising the programme end function (or start delay), an example can be seen below

when the Absolute Time Mode has been selected in the menu set-up stage.

Demo mode (default setting - NO)

Please set this option to “No” if not done so already - as this is for SERVICE use only.

PROGRAM END

If the demo mode option is not set on “NO” when exiting the infotext menu the wash

AT 18:00

programme WILL NOT commence. Demo Mode must be set at “NO” for the wash cycle to

commence. On entering “No” via the ( ) button you will then be asked if you wish to “Exit

Therefore, when setting the Programme end time the programme (as shown above) will end at

Menu”.

18.00.

The second is if you wish programme end time or delay start to be programmed by adding

Exit Menu

1

hours; e.g., programme to end in 1

/

2

hours. This is called Relative Time Mode.

If you are happy with the settings you have selected, you can now exit the menu by selecting

When utilising the programme end function (or start delay), an example can be seen below

“Yes” via the ( ) and ( ) buttons.

when the Relative Time Mode has been selected in the menu set-up stage.

However, if you are not happy with any of the settings selected you must select “No” to the

exit menu command and you can then commence the programming from the beginning. By

PROGRAM END

pressing the ( ) button you are able to enter and bypass each option individually until you

reach the option you would like to re-set.

IN 1H 30M

When you are completely satisfied with your menu selection, you may exit the menu and

testing of the installation may now commence.

Both options are very useful, but we feel that the Absolute Time Mode will be more beneficial

If, after the initial installation you may want to change of any of the menu at a later date, again

and easier to use since there will be no need to calculate how many hours you will need to

run through the menu options from the beginning and change the options you want to reset.

leave before you want the machine to end or start.

This may be useful to change the “Set New Time” when the clocks go forward or back.

On reaching the set time mode you will be asked if you would like to select “Relative” time or -

Once set, the menu options will remain in the memory of the machine even if the machine is

by scrolling through using the ( ) button - “Absolute” time.

unplugged or if a power cut occurs.

Enter the preferred setting by pressing the ( ) button.

When you have entered your preferred time-mode, the display will then ask for the Enable

Final Beeping to be set.

46

47