Villaware FPVLFPSL01: for u.k. and ireland only

for u.k. and ireland only

If the plug is not suitable for the socket outlets in your home, it can be removed and

replaced by a plug of the correct type. Please refer to “Installation of a plug” below.

Installation of a plug applicable to U.K. and Ireland.

WARNING - THIS APPLIANCE MUST BE EARTHED

NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about

the installation of the plug, please contact a qualified electrician. If a 13A3-pinplugistted,

it must be an ASTA approved plug, conforming to BS1363standard.

Replacement 5A fuses must be BS1 or ASTA BS1362approved.

The wires in the mains lead are coloured as such:

GREENANDYELLOW-EARTH

BROWN-LIVE

BLUE-NEUTRAL

Please note that the colour of these mains wires may not correspond with the colour

markings that identify the terminals in your plug.

Please proceed as follows:

ThewirewhichiscolouredGREENANDYELLOWmustbeconnectedtotheterminal

whichismarkedwiththeletter“E”orbytheearthsymbol“”orcolouredGREENAND

YELLOW.

TheBROWNcolouredwiremustbeconnectedtotheterminal,whichismarkedwiththe

letter“L”oriscolouredRED.

The BLUE coloured wire must be connected to the terminal, which is marked with the

letter“N”oriscolouredBLACK.

3