Stiebel Eltron SH S electronic с 26.04.2004: 4. Fault rectification

15

English

4. Fault rectification

 by thequalified installer

Fault

Info

Rectification

Establish voltage supply.

No voltage.

No hot water.

Low mixed water volumes.

Temperature setting too low.

Increase the temperature setting.

Heating element blocked with limescale.

Remove limescale from the heating element.

Small throughflow.

Dirt contamination or limescale deposits on

the perlators in the fittings or the shower

heads.

Clean and/or clear the limescale from the

outlet fittings.

„SERVICE ANODE“ signal lamp lights up.

Signal anode used up.

Check the signal anode and replace it if

necessary.

Table 3

3. Fault rectification

 by the user

Fault

Info

Rectification

Check the fuses in the house electrical

installation.

No voltage.

No hot water.

Low mixed water volumes.

Temperature setting too low.

Increase the temperature setting.

Table 2

„SERVICE ANODE“ signal lamp lights up.

Signal anode used up.

Arrange for the qualified installer to check

the signal anode and replace it if necessary.

Heating element blocked with limescale.

Arrange for the qualified installer to remove

limescale from the heating element.

Small throughflow.

Dirt contamination or limescale deposits on

the perlators in the fittings or the shower

heads.

Clean and/or clear the limescale from the

outlet fittings.

6. Environment and recycling 5. Guarantee

For guarantees please refer to the pespective

terms and conditions of supply for your

country.

The installation, electrical connection

and first operation of this appliance

should be carried out by a qualified

installer.

The company does not accept liability for

failure of any goods supplied which accor-

dance with the manufacturer's instructions.

Recycling of obselete appliances

Appliances with this label must not

be disposed off with the general

waste. They must be collected

separately and disposed off according to local

regulations.