Siemens TE502206RW: Water lter

deen

Water lter

A water lter can prevent scale buildup.

Before a new water lter is used, it must be

rinsed. To do this, proceed as follows:

1� Press the water lter rmly into the

water tank with the aid of the measuring

spoon (18)�

2� Fill the water tank (16) with water up to

the max mark�

3� Press and hold the e off / j button (12)

for at least three seconds. The menu

opens�

4� Press the e off / j button (12)

repeatedly until the display shows

Note: You can use the lter indicator to

No / Oldfilter�

mark the month in which you inserted the

5� Select Activate filter with the upper

lter. You can also mark the month in which

rotary knob (14)�

you will need to replace the lter next (at

6� Press the start button (10).

the latest after two months)�

7� Place a receptacle with a capacity of

0.5 litres under the outlet.

8� Press the start button (10).

9� Pull the milk frother (6) to open it.

10� Water will now ow through the lter to

rinse it�

11� Push the milk frother (6) in to close it.

12� Empty the container.

The appliance is ready to use once more.

Note: If the appliance has not been used

Note: Rinsing the lter simultaneously

for a prolonged period (e�g� vacation) the

activates the setting for the

Change filter!

lter should be rinsed before the appliance

display�

is used again. To do so, dispense a cup of

hot water and pour it away.

The lter is no longer effective when the

Change filter! display appears, or at

the latest after 2 months� It needs to be

replaced for reasons of hygiene and so that

there is no build-up of limescale (this could

damage the appliance)�

Replacement lters can be obtained from

retailers (TZ70003) or from customer

service (467873). If no new lter is used,

turn the

filter setting to No / Old�

8