Siemens TE502206RW: Adjusting the Preparation using grinding unit coffee beans

deen

Adjusting the

Preparation using

grinding unit

coffee beans

The rotary selector (3) adjusts the grind

This fully automatic espresso machine

settings from coarse to ne.

grinds beans freshly for each brew�

¡

Warning

Tip: If possible, use only beans for fully

Adjust the grinding unit only while it is

automatic coffee and espresso machines.

running! Otherwise the appliance may be

For optimal quality, deep-freeze the beans

damaged� Do not reach into the grinding

or store in a cool place in sealed containers�

unit.

Coffee beans can be ground while frozen.

● While the grinding unit is running, adjust

the rotary selector (3) from ne (a: Turn

Important: Fill the water tank (16) with

anticlockwise) to coarse (b: Turn clock-

fresh water every day. The tank (16) should

wise) as required.

always contain sufcient water for operating

the appliance�

a b

Different coffee drinks can be prepared

quite simply at the press of a button.

Preparation

The appliance must be ready for use.

1� Place the pre-warmed cup(s) under the

Note: The new setting will not become

coffee outlet (7).

apparent until after the second cup of

Tip: For a small espresso, always pre-

coffee�

heat the cup, e.g. using hot water.

2� Select the required coffee and the

Tip: For dark roast coffee beans, choose a

required per-cup quantity by turning the

ner grind, for lighter beans a coarser grind.

upper rotary knob (14). The selected

coffee and the per-cup quantity are

shown in the display�

3� Select the required coffee strength by

turning the lower rotary knob (13). The

selected coffee strength is shown in the

display�

4� Press the start button (10)�

The coffee is brewed and then dispensed

into the cup(s).

Press the start button (10) again to cut the

brewing process short�

10