Siemens TE502206RW: Menu settings

deen

Language

Menu settings

The display language can be set here.

You can adapt the appliance to your

individual needs in the menu settings.

Water hardness

1� Hold the e off / j button (12) down for at

The water hardness setting can be adjusted

least 3 seconds�

on this appliance� It is important to set the

2� Press the e off / j button (12) repeatedly

water hardness correctly, so that the appli-

until the required menu item appears in

ance indicates accurately when the descal-

the display�

ing programme should be run. The factory

3� Select the required setting with the

setting for the water hardness is 4�

upper rotary knob (14).

You can check the water hardness using

4� Conrm by pressing the start button

the enclosed test strip or by asking your

(10)�

local water supplier.

To leave the menu without making any

Dip the test strip briey in water, gently

changes, turn the rotary selector to Exit

shake off any drips, and check the result

and press the start button (10).

after one minute.

You can set the following:

Level Water hardness

German (°dH) French (°fH)

Shut off

1

1-7

1-13

Here you can set the time span after which

2

8-14

14-25

the appliance automatically switches off

3

15-21

26-38

following the last drink preparation� A time

4

22-30

39-54

between 15 minutes and 4 hours can be

set. The default time is 1 hour, but this can

be shortened to save energy�

Filter

Here you can set whether a water lter is

being used. If a water lter is not being

used, turn the setting to No / Old� If a

water lter is being used, turn the setting to

Activate filter. New water lters have to

be rinsed before use (see “Water lter” on

page 8)�

Start Calc‘n‘Clean

The service programmes (Calc‘n‘Clean

/ descaling / cleaning) can be selected

manually here. Press the start button (10)

and run the selected programme (see “Ser-

vice Programmes” on page 15)�

Temp.

The brewing temperature (high / middle /

low) can be set here�

9