Siemens TE502206RW: Cleaning the milk system

deen

Cleaning the milk system

2� Twist the steam nozzle (6d) anticlock-

If the milk system was not cleaned after

wise and remove it�

milk has been dispensed, after a certain

amount of time the message Rinse milk

system!

will appear on the display�

Clean the milk system immediately after use!

To pre-clean the milk system automatically:

1� Select

f

by turning the rotary knob (14).

2� Place a receptacle under the milk frother

(6)�

3� Press the start button (10).

4� Pull the milk frother (6) to open it. The

appliance now automatically lls the

receptacle with water. The rinse proce-

dure stops automatically after about 1

minute.

5� Push the milk frother (6) in to close it.

6� Let the milk frother (6) cool down�

7� Empty the receptacle and wipe dry the

outside of the milk frother (6).

In addition to this, clean the milk system

thoroughly at regular intervals (by hand or

in the dishwasher)�

Dismantling the milk system for cleaning:

1� To remove, take hold of the metal sleeve

and pull it downwards and off.

13

6d

2

3� Remove the frothing tube (6c).

6c

4� Clean the individual parts with a

detergent solution and a soft brush. If

necessary, soak in a warm detergent

solution. Clean the air hole (6e)

thoroughly.

6e

5� Rinse all parts with clean water and dry�

6� Fit the steam nozzle (6d) and frothing

tube

(6c) back into the metal sleeve�

6d6c

1 2

7� Twist the steam nozzle clockwise until

the marks are aligned�