Siemens TE502206RW: Cleaning Calc‘n‘Clean
Cleaning Calc‘n‘Clean: Siemens TE502206RW
Table of contents
- Safety instructions
- Table of Contents Included in delivery
- Overview Controls
- Display messages Before using for the rst time
- Switching off the appliance
- Water lter
- Menu settings
- Adjusting the Preparation using grinding unit coffee beans
- Preparation using Preparing milk froth ground coffee Dispensing hot water
- Maintenance and daily cleaning
- Cleaning the milk system
- Cleaning the brewing unit
- Tips on energy saving Service Programmes
- Descaling
- Cleaning Calc‘n‘Clean
- Frost protection
- Accessories Disposal Guarantee Technical data
- Simple troubleshooting Problem Cause Solution
- Problem Cause Solution
deen
Cleaning
Calc‘n‘Clean
Duration: approx. 10 minutes.
Duration: approx. 35 minutes.
Important: Clean the brewing unit before
Calc‘n‘Clean combines the separate func-
starting the service programme, see chapter
tions of descaling and cleaning� If both
“Cleaning the brewing unit”.
programmes are due to be run soon, the
espresso machine automatically suggests
If the message Clean required! appears
this service programme�
on the display, press the e off / j button
(12) for 3 seconds and then press the start
Important: If there is a lter in the water
button (10).
tank (16), it needs to be removed before
The cleaning programme will start.
the service programme is run. Clean the
To clean the appliance before being
brewing unit before starting the service pro-
prompted, press the e off / j button (12) for
gramme, see chapter “Cleaning the brewing
at least 3 seconds. Then press the e off / j
unit”.
button (12) briey twice. Turn the upper
If the message Calc‘n‘Clean required!
rotary knob (14) until Start cleaning
appears on the display, press the e off / j
appears in the display�
button (12) for 3 seconds and then press
To start the cleaning procedure, press the
the start button (10). The service pro-
start button (10).
gramme will start�
The display will guide you through the
To run Calc‘n‘Clean before being prompted,
programme�
press the e off / j button (12) for at least 3
seconds�
Empty drip tray
Then press the e off / j button (12) briey
Insert drip tray
twice. Turn the upper rotary knob (14)
● Empty drip tray (8) and replace them.
until Start Calc‘n‘Clean appears in the
display. To start Calc‘n‘Clean, press the start
Cleaning in progress
button (10).
The appliance rinses twice.
The display will guide you through the
programme�
Open drawer
● Open the drawer (4)�
Empty drip tray
Insert drip tray
Fill cleaner
● Empty drip tray (8) and replace them.
● Drop a Siemens cleaning tablet in the
Calc‘n‘Clean in progress
drawer (4) and close�
The appliance rinses twice.
Cleaning in progress
Open drawer
The cleaning pro gramme will now run for
● Open the drawer (4)�
about 8 minutes.
Fill cleaner
Empty drip tray
● Drop a Siemens cleaning tablet in the
Insert drip tray
drawer (4) and close�
● Empty drip tray (8) and replace them.
The appliance has nished cleaning is
ready for use again.
17
