HP LaserJet Ultra MFP M230: 3 Regulatory information

3 Regulatory information

●

Declaration of conformity

●

Declaration of conformity

●

Declaration of conformity

●

Safety statements

●

Additional statements for telecom (fax) products

●

Additional statements for wireless products

ENWW

33

Declaration of conformity

Declaration of Conformity

according to ISO/IEC 17050-1 and EN 17050-1

Manufacturer's Name:

HP Inc.

DoC#: SHNGC-1503-00-rel.1.0

Manufacturer's Address:

Hewlett-Packard Information Technology R&D (Shanghai) Co., Ltd. No. 2727 Jinke Road, Shanghai, China 

201206

declares, that the product

Product Name:

HP LaserJet Pro MFP M227sdn / HP LaserJet Ultra MFP M230sdn / HP LaserJet Pro MFP M227d

Regulatory Model Number:

2)

SHNGC-1503-00

Product Options:

All

Toner Cartridges:

CF230A / CF231A / CF203X

conforms to the following Product Specifications:

SAFETY:

IEC 60950-1:2005 +A1 :2009+A2:2013/ EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013

IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)

IEC 62479:2010 / EN 62479:2010

GB4943-2011

EMC:

CISPR 22:2008 / EN 55022:2010 - Class B

1)

EN 61000-3-2:2006 +A1:2009 +A2:2009

EN 61000-3-3:2008

EN 55024:2010

FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 5

GB9254-2008, GB17625.1-2012

Energy Use:

Regulation (EC) No. 1275/2008

EN50564:2011 ; IEC62301 :2011

RoHS:

EN50581:2012

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and the Ecodesign 

Directive 2009/125/EC, the RoHS Directive 2011/65/EU and carries the CE-Marking 

 accordingly.

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1.

The product was tested in a typical configuration with HP Personal Computer Systems.

2.

For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the 

product number(s).

Shanghai, China

October 1, 2016

For Regulatory Topics only, contact:

34

Chapter 3   Regulatory information

ENWW

European Contact:

HP Deutschland GmbH, HP HQ-TRE, 71025 Boeblingen, Germany

www.hp.eu/certificates

USA Contact:

HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501

ENWW

Declaration of conformity

35

Declaration of conformity

Declaration of Conformity

according to ISO/IEC 17050-1 and EN 17050-1

Manufacturer's Name:

HP Inc.

DoC#: SHNGC-1503-02 rel 1.0

Manufacturer's Address:

Hewlett-Packard Information Technology R&D (Shanghai) Co., Ltd. No. 2727 Jinke Road, Shanghai, China 

201206

declares, that the product

Product Name:

HP LaserJet Pro MFP M227fdw / HP LaserJet Ultra MFP M230fdw

Regulatory Model Number:

2)

SHNGC-1503-02

Including

BOISB-1500-00 – (US-Fax Module)

BOISB-1500-01 – (EURO-Fax Module)

SDGOB-1505 – (Radio Module)

Product Options:

All

Toner Cartridges:

CF230A / CF231A / CF230X

conforms to the following Product Specifications:

SAFETY:

IEC 60950-1:2005 +A1 :2009+A2:2013/ EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013

IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)

IEC 62479:2010 / EN 62479:2010

GB4943-2011

EMC:

CISPR 22:2008 / EN 55022:2010 - Class B

1)

EN 61000-3-2:2006 +A1:2009 +A2:2009

EN 61000-3-3:2008

EN 55024:2010

FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 5

GB9254-2008, GB17625.1-2012

Radio:

5)

EN 301 489-1 V1.9.2 / EN 301 489-17:V2.2.1

EN 300 328: V1.8.1

FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210

IEC 62311:2007 / EN62311:2008

Telecom:

4)

ES 203 021; FCC Title 47 CFR, Part68

3)

Energy Use:

Regulation (EC) No. 1275/2008

EN50564:2011 ; IEC62301 :2011

RoHS:

EN50581:2012

Supplementary Information:

36

Chapter 3   Regulatory information

ENWW

The product herewith complies with the requirements of the R&TTE; Directive 1999/5/EC, EMC Directive 2004/108/EC, the Low Voltage Directive 

2006/95/EC and the Ecodesign Directive 2009/125/EC, the RoHS Directive 2011/65/EU and carries the CE-Marking 

 accordingly.

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1.

The product was tested in a typical configuration with HP Personal Computer Systems.

2.

For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the 

product number(s).

3.

Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition to those listed above.

4.

This product uses an analog fax accessory module which Regulatory Model number is: BOISB-1500-00, BOISB-1500-01 (EURO LIU), as needed to 

meet technical regulatory requirements for the countries/regions this product will be sold.

5.

This product uses a radio module device which Regulatory Model number is SDGO-1505 as needed to meet technical regulatory requirements for 

the countries/regions this product will be sold.

Shanghai, China

October 1, 2016

For Regulatory Topics only, contact:

European Contact:

HP Deutschland GmbH, HP HQ-TRE, 71025 Boeblingen, Germany

www.hp.eu/certificates

USA Contact:

HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501

ENWW

Declaration of conformity

37

Declaration of conformity

Declaration of Conformity

according to ISO/IEC 17050-1 and EN 17050-1

Manufacturer's Name:

HP Inc.

DoC#: SHNGC-1503-01-rel.1.0

Manufacturer's Address:

Hewlett-Packard Information Technology R&D (Shanghai) Co., Ltd. No. 2727 Jinke Road, Shanghai, China 

201206

declares, that the product

Product Name:

HP LaserJet Pro MFP M227fdn

Regulatory Model Number:

2)

SHNGC-1503-01

Including

BOISB-1500-00 – (US-Fax Module)

BOISB-1500-01 – (EURO-Fax Module)

Product Options:

All

Toner Cartridges:

CF230A

conforms to the following Product Specifications:

SAFETY:

IEC 60950-1:2005 +A1 :2009+A2:2013/ EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013

IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)

IEC 62479:2010 / EN 62479:2010

GB4943-2011

EMC:

CISPR 22:2008 / EN 55022:2010 - Class B

1)

EN 61000-3-2:2006 +A1:2009 +A2:2009

EN 61000-3-3:2008

EN 55024:2010

FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 5

GB9254-2008, GB17625.1-2012

Telecom:

4)

ES 203 021; FCC Title 47 CFR, Part68

3)

Energy Use:

Regulation (EC) No. 1275/2008

EN50564:2011 ; IEC62301 :2011

RoHS:

EN50581:2012

Supplementary Information:

The product herewith complies with the requirements of the R&TTE; Directive 1999/5/EC, EMC Directive 2004/108/EC, the Low Voltage Directive 

2006/95/EC and the Ecodesign Directive 2009/125/EC, the RoHS Directive 2011/65/EU and carries the CE-Marking 

 accordingly.

38

Chapter 3   Regulatory information

ENWW

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1.

The product was tested in a typical configuration with HP Personal Computer Systems.

2.

For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the 

product number(s).

3.

Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition to those listed above.

4.

This product uses an analog fax accessory module which Regulatory Model number is: BOISB-1500-00, BOISB-1500-01 (EURO LIU), as needed to 

meet technical regulatory requirements for the countries/regions this product will be sold.

Shanghai, China

October, 2016

For Regulatory Topics only, contact:

European Contact:

HP Deutschland GmbH, HP HQ-TRE, 71025 Boeblingen, Germany

www.hp.eu/certificates

USA Contact:

HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501

ENWW

Declaration of conformity

39

Safety statements

FCC regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this 

equipment is not installed and used in accordance with the instructions, it may cause harmful interference to 

radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

●

Reorient or relocate the receiving antenna.

●

Increase separation between equipment and receiver.

●

Connect equipment to an outlet on a circuit different from that to which the receiver is located.

●

Consult your dealer or an experienced radio/TV technician.

NOTE:

Any changes or modifications to the printer that are not expressly approved by HP could void the user’s 

authority to operate this equipment.

Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.

Canada - Industry Canada ICES-003 Compliance Statement

CAN ICES-3(B)/NMB-3(B)

VCCI statement (Japan)

EMC statement (Korea)

Power cord instructions

Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product 

label. The product uses either 110-127 Vac or 220-240 Vac and 50/60 Hz.

40

Chapter 3   Regulatory information

ENWW

Connect the power cord between the product and a grounded AC outlet.

CAUTION:

To prevent damage to the product, use only the power cord that is provided with the product.

Power cord statement (Japan)

Laser safety

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has 

implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for 

products marketed in the United States. The device is certified as a “Class 1” laser product under the U.S. 

Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation 

Control for Health and Safety Act of 1968. Since radiation emitted inside the device is completely confined within 

protective housings and external covers, the laser beam cannot escape during any phase of normal user 

operation.

WARNING!

Using controls, making adjustments, or performing procedures other than those specified in this 

user guide may result in exposure to hazardous radiation.

Laser statement for Finland

Luokan 1 laserlaite

Klass 1 Laser Apparat

HP LaserJet Pro MFP M227sdn, M227fdw, M227d, M227fdn, HP LaserJet Ultra MFP M230sdn, M230fdw, 

laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen 

suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty 

standardin EN 60825-1 (2007) mukaisesti.

VAROITUS !

Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 

1 ylittävälle näkymättömälle lasersäteilylle.

VARNING !

Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig 

laserstrålning, som överskrider gränsen för laserklass 1.

HUOLTO

HP LaserJet Pro MFP M227sdn, M227fdw, M227d, M227fdn, HP LaserJet Ultra MFP M230sdn, M230fdw - 

kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen 

huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, 

paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja 

ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja.

VARO !

Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömällelasersäteilylle laitteen ollessa toiminnassa. 

Älä katso säteeseen.

ENWW

Safety statements

41

VARNING !

Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. 

Betrakta ej strålen.

Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista: Aallonpituus 775-795 nm Teho 5 m W Luokan 

3B laser.

42

Chapter 3   Regulatory information

ENWW

GS statement (Germany)

Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um 

störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren 

Gesichtsfeld platziert werden.

Das Gerät ist kein Bildschirmarbeitsplatz gemäß BildscharbV. Bei ungünstigen Lichtverhältnissen (z. B. direkte 

Sonneneinstrahlung) kann es zu Reflexionen auf dem Display und damit zu Einschränkungen der Lesbarkeit der 

dargestellten Zeichen kommen.

Eurasian Conformity (Belarus, Kazakhstan, Russia)

ENWW

Safety statements

43

Additional statements for telecom (fax) products

EU Statement for Telecom Operation

This product is intended to be connected to the analog Public Switched Telecommunication Networks (PSTN) of 

European Economic Area (EEA) countries/regions.

It meets requirements of EU R&TTE Directive 1999/5/EC (Annex II) and carries appropriate CE conformity 

marking.

For more details see Declaration of Conformity issued by the manufacturer in another section of this manual.

However due to differences between individual national PSTNs the product may not guarantee unconditional 

assurance of successful operation on every PSTN termination point. Network compatibility depends on the 

correct setting being selected by the customer in preparation of its connection to the PSTN. Please follow the 

instructions provided in the user manual.

If you experience network compatibility issues, please contact your equipment supplier or HP help desk in the 

country/region of operation.

Connecting to a PSTN termination point may be the subject of additional requirements set out by the local PSTN 

operator.

New Zealand Telecom Statements

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the 

item complies with minimum conditions for connection to its network. It indicates no endorsement of the 

product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item 

will work correctly in all respects with another item of Telepermitted equipment of a different make or model, 

nor does it imply that any product is compatible with all of Telecom’s network services.

This equipment may not provide for the effective hand-over of a call to another device connected to the same 

line.

This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.

This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New 

Zealand.

Additional FCC statement for telecom products (US)

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back 

of this equipment is a label that contains, among other information, a product identifier in the format 

US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive 

RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not 

all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be 

connected to the line, as determined by the total RENs, contact the telephone company to determine the 

maximum REN for the calling area.

This equipment uses the following USOC jacks: RJ11C.

An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed 

to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68 

compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party 

Line Service is subject to state tariffs.

44

Chapter 3   Regulatory information

ENWW

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that 

temporary discontinuance of service may be required. If advance notice is not practical, the telephone company 

will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the 

FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could 

affect the operation of the equipment. If this happens, the telephone company will provide advance notice in 

order for you to make the necessary modifications in order to maintain uninterrupted service.

If trouble is experienced with this equipment, please see the numbers in this manual for repair and (or) warranty 

information. If the trouble is causing harm to the telephone network, the telephone company may request you 

remove the equipment from the network until the problem is resolved.

The customer can do the following repairs: Replace any original equipment that came with the device. This 

includes the toner cartridge, the supports for trays and bins, the power cord, and the telephone cord. It is 

recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. 

This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

Telephone Consumer Protection Act (US)

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other 

electronic device, including fax machines, to send any message unless such message clearly contains, in a 

margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time 

it is sent and an identification of the business, other entity, or individual sending the message and the telephone 

number of the sending machine or such business, or other entity, or individual. (The telephone number provided 

cannot be a 900 number or any other number for which charges exceed local or long distance transmission 

charges).

Industry Canada CS-03 requirements

Notice: The Industry Canada label identifies certified equipment. This certification means the equipment meets 

certain telecommunications network protective, operational, and safety requirements as prescribed in the 

appropriate Terminal Equipment Technical Requirement document(s). The Department does not guarantee the 

equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is 

permissible for the equipment to be connected to the facilities of the local telecommunications company. The 

equipment must also be installed using an acceptable method of connection. The customer should be aware that 

compliance with the above conditions may not prevent degradation of service in some situations. Repairs to 

certified equipment should be coordinated by a representative designated by the supplier. Any repairs or 

alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications 

company cause to request the user to disconnect the equipment. Users should ensure for their own protection 

that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe 

system, if present, are connected together. This precaution can be particularly important in rural areas.

CAUTION:

Users should not attempt to make such connections themselves, but should contact the appropriate 

electric inspection authority, or electrician, as appropriate. The Ringer Equivalence Number (REN) of this device is 

0.0B. 

This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme 

aux specifications techniques applicables d’Industrie Canada.

Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the 

maximum number of terminals allowed to be connected to a telephone interface. The termination on an 

interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer 

Equivalence Number of all the devices does not exceed five (5.0). / L’indice d’équivalence de la sonnerie (IES) sert 

à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La 

ENWW

Additional statements for telecom (fax) products

45

terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition 

que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.

The standard connecting arrangement code (telephone jack type) for equipment with direct connections to the 

telephone network is CA11A.

Vietnam Telecom wired/wireless marking for ICTQC Type approved products

46

Chapter 3   Regulatory information

ENWW

Additional statements for wireless products

FCC compliance statement—United States

Exposure to radio frequency radiation

CAUTION:

The radiated output power of this device is far below the FCC radio frequency exposure limits. 

Nevertheless, the device shall be used in such a manner that the potential for human contact during normal 

operation is minimized.

In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the 

antenna shall not be less than 20 cm (8 in) during normal operation.

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this 

device may not cause interference, and (2) this device must accept any interference, including interference that 

may cause undesired operation of the device.

CAUTION:

Based on Section 15.21 of the FCC rules, changes of modifications to the operation of this product 

without the express approval by HP may invalidate its authorized use.

Australia statement

This device incorporates a radio-transmitting (wireless) device. For protection against radio transmission 

exposure, it is recommended that this device be operated no less than 20 cm from the head, neck, or body.

Brazil ANATEL statement

Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência 

prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter 

primário.

Canadian statements

For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital 

apparatus as set out in the radio interference regulations of the Canadian Department of Communications. The 

internal wireless radio complies with RSS 210 of Industry Canada.

Pour l´usage d´intérieur. Le présent appareil numérique n´émet pas de bruits radioélectriques dépassant les 

limites applicables aux appareils numériques de Classe B prescribes dans le règlement sur le brouillage 

radioélectrique édicté par le Ministère des Communications du Canada. Le composant RF interne est conforme à 

la norme CNR-210 d´Industrie Canada.

Exposure to Radio Frequency Radiation (Canada)

WARNING!

Exposure to Radio Frequency Radiation. The radiated output power of this device is below the 

Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that 

the potential for human contact is minimized during normal operation.

To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to 

the antennas should not be less than 20 cm (8 inches).

ENWW

Additional statements for wireless products

47

Products with 5 GHz Operation Industry of Canada

CAUTION:

When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in 

the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the 

frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile 

satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-

GHz bands. These radar stations can cause interference with and/or damage to this device.

European Union regulatory notice

The telecommunications functionality of this product may be used in the following EU and EFTA countries/

regions:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, 

Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, 

Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.

Notice for use in Japan

この機器は技術基準適合証明又は工事設計認証を受けた無線設備を搭載しています。

Notice for use in Russia

Существуют определенные ограничения по использованию беспроводных сетей (стандарта 802.11 b/g) с 

рабочей частотой 2,4 ГГц: Данное оборудование может использоваться внутри помещений с 

использованием диапазона частот 2400-2483,5 МГц (каналы 1-13). При использовании внутри помещений 

максимальная эффективная изотропно–излучаемая мощность (ЭИИМ) должна составлять не более 

100мВт.

Mexico statement

Aviso para los usuarios de México

“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o 

dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, 

incluyendo la que pueda causar su operación no deseada."

Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.

48

Chapter 3   Regulatory information

ENWW

Taiwan statement

Korean statement

Vietnam Telecom wired/wireless marking for ICTQC Type approved products

ENWW

Additional statements for wireless products

49

50

Chapter 3   Regulatory information

ENWW