Acer X1163N: Regulations and safety notices

Regulations and safety notices: Acer X1163N

44

Regulations and safety notices

FCC notice

English

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class B limits may be attached to this equipment. Operation

with non-certified peripherals is likely to result in interference to radio and TV

reception.

Caution

Changes or modifications not expressly approved by the manufacturer could

void the user's authority, which is granted by the Federal Communications

Commission, to operate this device.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

45

English

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du

English

Canada.

Declaration of Conformity for EU countries

Acer hereby declares that this projector series is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Compliant with Russian regulatory certification

Radio device regulatory notice

Note: The regulatory information below is for models with

wireless LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any

country or region in which it has been approved for wireless use. Depending on

configurations, this product may or may not contain wireless radio devices (such

as wireless LAN and/or Bluetooth modules).

Canada — Low-power license-exempt radio

communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference

that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is

intended to be operated indoors and installation outdoors is subject

to licensing.

List of applicable countries

This device must be used in strict accordance with the regulations and constraints in the

country of use. For further information, please contact the local office in the country of use.

Please see http://ec.europa.eu/enterprise/rtte/implem.htm

for the latest country list.

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi

New Taipei City 221, Taiwan

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan

Contact Person: Mr. RU Jan, e-mail:ru.jan@acer.com

And,

Acer Italy s.r.l

Via Lepetit, 40, 20020 Lainate (MI) Italy

Tel: +39-02-939-921 ,Fax: +39-02 9399-2913

www.acer.it

Declare under our own responsibility that the product:

Product: Projector

Trade Name: Acer

Model Number: DNX1132/DSV1133/DSV1134

X1263/X1263N/D113/EV-X13/P1163/D103D/

EV-S13H/X1163/X1163N/X113/D103/EV-S13 series

To which this declaration refers conforms to the relevant standard or other standardizing documents:

x EN 55022:2006/A1:2007 Class B; EN 55024:2010

x EN 61000-3-2:2006+A1:2009+A2:2009 Class A; EN61000-3-3:2008

x EN 60950-1:2006+A11:2009+A1:2010+A12:2011

x EN 50581:2012

We hereby declare above product is in compliance with the essential requirements and other relevant

provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, RoHS Directive

2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign

requirements for energy-related product.

Year to begin affixing CE marking 2013.

_______________________________

Jan. 31, 2013

RU Jan / Sr. Manager Date

Regulation, Acer Inc.

Acer America Corporation

333 West San Carlos St.,

Suite 1500

San Jose, CA 95110

U. S. A.

Tel: 254-298-4000

Fax: 254-298-4147

www.acer.com

Federal Communications Commission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

The following local Manufacturer / Importer is responsible for this declaration:

Product:

DLP Projector

Model Number: DNX1132/DSV1133/DSV1134

Machine Type: X1263/X1263N/D113/EV-X13/P1163/D103D/

EV-S13H/X1163/X1163N/X113/D103/EV-S13

series

Name of Responsible Party: Acer America Corporation

Address of Responsible Party: 333 West San Carlos St.

Suite 1500

San Jose, CA 95110

U. S. A.

Contact Person: Acer Representative

Phone No.: 254-298-4000

Fax No.: 254-298-4147