Acer PE-W30: First Thing First

First Thing First: Acer PE-W30

viii

First Thing First

Usage Notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display

housing.

Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

Block the slots and openings on the projector provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this

user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow the projector to cool down, and follow all

changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"

menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp

module has been replaced. To replace the lamp, follow the procedures listed under

"Replacing the Lamp".

Information for Your Safety and Comfort iii

First Thing First viii

Usage Notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 4

Remote Control Layout 5

Getting Started 7

Connecting the Projector 7

Contents

Turning the Projector On/Off 8

Turning On the Projector 8

Turning Off the Projector 9

Adjusting the Projected Image 10

Adjusting the Height of the Projected Image 10

How to Optimize Image Size and Distance 11

How to Get a Preferred Image Size by

Adjusting Distance and Zoom 13

User Controls 15

Installation Menu 15

Acer Empowering Technology 16

Onscreen Display (OSD) Menus 18

Color 19

Image 21

Setting 24

Management 27

Audio (X1140A/X1240/X1340W/P1340W) 28

3D 29

Language 30

Appendices 31

Troubleshooting 31

LED & Alarm Definition Listing 35

Replacing the Lamp 36

Ceiling Mount Installation 37

Specifications 40

Compatibility Modes 42

Regulations and safety notices 46