Jabra Cruiser: english

2 Set your Bluetooth phone to ‘discover’ the Jabra CRUISER

- Follow your phone’s instruction guide. First make sure that

Bluetooth is activated on your mobile phone. Then set your

phone to discover the speakerphone. This usually involves

going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone

and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*

3 Your phone will nd the Jabra CRUISER

english

- Your phone will find the speakerphone under the name

“Jabra CRUISER”.

- Your phone then asks if you want to pair with the speakerphone.

Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with

the passkey or PIN = 0000 (4 zeros). Your phone will confirm

when pairing is complete.

JABRA CRUISER

6

Manual pairing mode

If you wish to use the speakerphone with a dierent phone, or

if the pairing process was interrupted, you can manually set the

speakerphone to pairing mode.

Turn the speakerphone on. Press and hold the answer/end button

for approximately 5 seconds until “pairing mode” is announced.

Then repeat steps 2. and 3. in the above pairing guide.

ConneCtInG WItH YoUR PHone

Pairing is only needed the rst time a speakerphone and a phone

are used together. When the speakerphone and phone have

been paired once, they will automatically connect when the

speakerphone is on and Bluetooth is activated on the phone. The

speakerphone can be used when it is “connected” to the phone.

If the devices are paired, but do not immediately connect, tap the

answer/end button.

* Phone dependent