Skil 1840 AD: APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT DECLARATION OF CONFORMITY NOISE/VIBRATION

APPLICATION ADVICE

• For cuts parallel with the side of your workpiece use

parallel guide

• For making parallel cuts in a workpiece far from the edge

0

- fasten a straight piece of wood on the workpiece by

means of 2 clamps

- guide tool with base-plate along edge of wood which

now functions as a parallel guide

• When using bits with a pilot or ball bearing, the pilot or

ball bearing should slide along the edge of the workpiece

which should be perfectly smooth &

• For larger routing depths, it is recommended to carry out

several repetitive cuts with lower removal rates

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots S 2)

• Lubricate sliding bars T 2 occasionally

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol * will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that the product

described under “Technical data” is in conformity with the

following standards or standardization documents: EN

60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU, 2009/125/EC (EU regulation 1194/2012)

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

10

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 84 dB(A) and the sound

power level 95 dB(A) (standard deviation: 3 dB), and the

vibration 4.4 m/s² (hand-arm method; uncertainty K = 1.5

m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

15.08.2013

Défonceuse 1840

INTRODUCTION

• L’outil est conçu pour le fraisage des rainures, bords,

prols et rainures droites dans le bois, les matières

plastiques et matériaux de construction légers ainsi que

pour le fraisage par copiage

• Cet outil n’est conçu pour un usage professionnel

• L’éclairage de cet outil électroportatif est destiné à

éclairer l’espace de travail de l’outil; il n’est pas conçu

pour servir de source d’éclairage ambiant dans une pièce

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Blocage de l’arbre

B Chapeau

C Clé

D Jauge de profondeur

E Bouton de réglage précis

F Tourelle de butées de profondeur

G Bouton de réglage (jauge de profondeur)

H Levier de verrouillage

J Molette pour régler la vitesse

K Axe pour aspirateur

L Interrupteur marche/arrêt

M Bouton de blocage de l’interrupteur

N Bouton de réglage (poignée)

O Voyants DEL

P Plaque adaptatrice

Q Guide parallèle

R Plaque de base

S Fentes de ventilation

T Axes de guidage

V Tiges du guide parallèle