Yamaha BRX-610: USING USEFUL FUNCTIONS ■ Registering HDMI components to TV ■ Changing the connection method and connected components

USING USEFUL FUNCTIONS

■ Registering HDMI components to TV

1 Select this unit as the input source of the TV.

2 Select Disc/USB/Network as the input source of this

unit.

3 Check that the image from this unit is correctly

displayed on the TV.

4 Check that the HDMI control function works (turn on

this unit or adjust the volume level using the TV

remote control).

y

For some HDMI components, you only need to set the HDMI

control function. Registering HDMI components to TV is not

required in this case.

If the HDMI control function is not working

Check the following:

• The TV is connected to the HDMI terminal of this unit.

OPERATIONS

The HDMI control function is set to [On] in SETUP

menu (p. 35).

• The HDMI control function is enabled on the TV. (Also

check the relative settings such as power interlock

function or speaker priority.)

The HDMI control function is not working even

checking the above

• Turn off this unit and the TV, and then turn them back

on again.

• Unplug the AC power supply cable of this unit, the TV

and external components connected to the TV with

HDMI.

Plug them in again after about 30 seconds.

■ Changing the connection method and

connected components

When the connected components and jacks are changed,

reset this unit with following procedures.

1 Turn off the HDMI control function of the TV and

this unit, turn off all connected devices, and change

the connections.

2 Perform the step 1 to 3 of “Setting the HDMI control

function” (p. 30).

English

31 En