Yamaha BRX-610: Display Setting ■ TV

SETUP MENU

[Video Out Select]

Display Setting

You can select the video output resolution from

[Composite], [HDMI Auto], [HDMI 1080p], [HDMI

The default settings are marked with “

*

”.

1080i], [HDMI 720p], [HDMI 480p/576p], and [HDMI

480i/576i]. When set to [HDMI Auto], resolution is set to

■ TV

the maximum resolution according to the connected TV.

[3D Output]

For more details on output formats, refer to “About the

You can select 3D or 2D video output from this unit.

video output formats” (p. 40).

Auto* This unit automatically selects 3D or 2D videos.

Composite, HDMI Auto

*

, HDMI 1080p, HDMI 1080i, HDMI

Off This unit always selects 2D videos.

720p, HDMI 480p/576p, HDMI 480i/576i

Notes

Note

Even if you set [3D Output] to [Auto] and play back a BD 3D

• When you connect your TV and this unit via the VIDEO jack,

disc, this unit selects 2D images depending on the connection and

select [Composite], [HDMI 480p/576p], or [HDMI 480i/576i].

the setting of TV, etc (p. 13).

• To output HD audio (such as Dolby TrueHD or DTS-HD) from

the HDMI terminal, set [Video Out Select] to [HDMI Auto] or

[TV Screen]

more than [HDMI 720p].

You can set the screen aspect ratio of the connected TV,

[TV System]

and adjust the video output.

You can select [TV System] from [PAL], [NTSC] and

If you switch your TV (i.e. because you have bought a

[Multi]. Set the same TV System as your TV set. For more

new one) and the screen aspect ratio of the connected TV

details on output formats, refer to “About the video output

changes, you will have to change the TV Screen setting.

formats” (p. 40).

16:9 Full Select this when this unit is connected to a TV with a

16:9 screen. When a 4:3 aspect ratio video is played

NTSC, PAL

*

, Multi (Asia, China, Europe and Russia models)

back, the video is displayed as shown below.

NTSC

*

, PAL, Multi (U.S.A. and Canada models)

16:9 Normal

*

Select this when this unit is connected to a TV with a

16:9 screen. When a 4:3 aspect ratio video is played

[Color Space]

back, the video is displayed as shown below.

You can select the Color Space (p. 50) output from

4:3 Pan Scan Select this when this unit is connected to a TV with a

HDMI. This function is available when this unit is

4:3 screen. When a 16:9 aspect ratio video is played

connected with an HDMI cable.

SETTINGS

back, the video is displayed as shown below.

YCbCr 4:4:4

*

Sets Color Space to YCbCr 4:4:4.

4:3 Letterbox Select this when this unit is connected to a TV with a

YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.

4:3 screen. When a 16:9 aspect ratio video is played

back, the video is displayed as shown below.

Full RGB When RGB is set and white and black on the screen

are too faint, select this item. This setting is effective

when a connected component supports RGB 0-255

Original

On 16:9 (wide screen) TV

range.

image size

16:9 Full 16:9 Normal

RGB Outputs video signal at normal signal range.

Note

This function is only available on TVs that support this function.

4:3

[HDMI Deep Color]

When your TV is compatible with Deep Color (p. 50), set

Original

On 4:3 TV

this item according to your TV. This function is available

image size

4:3 Pan Scan 4:3 Letterbox

when this unit is connected with an HDMI cable.

30 bits, 36 bits, Off

*

16:9

English

37 En