Skil 9030 AA: DECLARATION OF CONFORmITY APPLICATIONADVICE MAINTENANCE/SERVICE ENVIRONMENT NOISE/VIBRATION

! beforeswitchingoffthetool,youshouldliftit

must be collected separately and returned to an

fromtheworkpiece

environmentally compatible recycling facility

! theaccessorycontinuestorotateforashorttime

- symbol ! will remind you of this when the need for

afterthetoolhasbeenswitchedoff

disposing occurs

• Grinding 8

- move the tool back and forth with moderate pressure

DECLARATION OF CONFORmITY

! neveruseacuttingdiscforsidegrinding

• We declare under our sole responsibility that the product

• Cutting 9

described under “Technical data” is in conformity with the

- do not tilt the tool while cutting

following standards or standardization documents: EN

- always move the tool in same direction as arrow on

60745, EN 61000, EN 55014, in accordance with the

tool head, in order to prevent the tool from being

provisions of the directives 2004/108/EC, 2006/42/EC,

pushed out of the cut in an uncontrolled manner

2011/65/EU

- do not apply pressure on the tool; let the speed of the

• Technicalfileat: SKIL Europe BV (PT-SEU/ENG1),

cutting disc do the work

4825 BD Breda, NL

- the working speed of the cutting disc depends on the

material to be cut

- do not brake cutting discs with side pressure

• Holding and guiding the tool

- always hold the tool rmly with both hands, so you will

have full control of the tool at all times

! whileworking,alwaysholdthetoolatthe

grey-colouredgriparea(s)0

- provide for a secure stance

- pay attention to the direction of rotation; always hold

the tool so, that sparks and grinding/cutting dust y

away from the body

- keep ventilation slots K 4 uncovered

APPLICATIONADVICE

• Instead of ange B 4 the "CLIC" quick-clamping ange

(SKIL accessory 2610388766) can be used; grinding/

cutting discs can then be mounted without the use of

accessory keys

• For more tips see www.skil.com

MAINTENANCE/SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots K 4)

! donotattempttocleanventilationslotsby

insertingpointedobjectsthroughopenings

! disconnecttheplugbeforecleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Donotdisposeofelectrictools,accessoriesand

packagingtogetherwithhouseholdwastematerial

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

10

02.08.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 92 dB(A) and the sound

power level 103 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (hand-arm method; uncertainty K = 1.5 m/s²)

✱ when surface grinding 10.5 m/s²

✱ when sanding 6.4 m/s²

! otherapplications(suchascutting-offorwire

brushing)mayhavedifferentvibrationvalues

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protectyourselfagainsttheeffectsofvibration

bymaintainingthetoolanditsaccessories,

keepingyourhandswarm,andorganizingyour

workpatterns

Meuleused’angle 9005/9030/9035

INTRODUCTION

• Cet outil sert au meulage, au tronçonnage et à l’ébarbage

léger de pièces en métal et en pierre sans utiliser de

l’eau; combiné avec des accessoires spéciques, cet

outil peut également servir au brossage et au ponçage

• Cet outil n’est conçu pour un usage professionnel