Indesit PI 604: Maintenance and care

GB

13

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

!

 Do not use abrasive or corrosive detergents, stain

removers, anti-rust products, powder detergents or

sponges with abrasive surfaces: these may scratch

the surface.

!

 Never use steam cleaners or pressure cleaners on

the appliance.

• It is usually enough to wash the hob with a damp

sponge and dry it with absorbent kitchen roll.

• The electric hobs should be cleaned using a damp

cloth and then rubbed with oil while still warm.

• Stainless steel may become marked if it comes into

contact with very hard water or harsh detergents

(containing phosphorous) for long periods of time.

After cleaning, it is advisable to rinse thoroughly

and dry. It is also recommended that drops of water

be dried.

Maintenance and care

Assistance

Communicating:

• appliance model (Mod.)

• serial number (S/N)

This information is found on the data plate located on

the appliance and/or on the packaging.

Technical characteristic

DATA PLATE 

Electrical section 

voltage: 230V/400V 3N ~ 50/60Hz 

Max power 7000 W

This appliance conforms to the 

following European Economic 

Community directives:  

- 2006/95/EEC of 12/12/06 (Low 

Voltage) and subsequent 

amendments; 

- 2004/108/EEC of 15/12/04 

(Electromagnetic Compatibility) and 

subsequent amendments; 

- 93/68/EEC of 22/07/93 and 

subsequent amendments. 

- 2002/96/EC and subsequent 

amendments.