Skil 6950 AA (Torro): APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT DECLARATION OF CONFORMITY NOISE/VIBRATION

• Adjusting drilling depth 0

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

• Holding and guiding the tool !

4825 BD Breda, NL

! while working, always hold the tool at the

grey-coloured grip area(s)

- always use auxiliary handle G (can be adjusted as

illustrated)

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

• Use the appropriate bits @

! only use sharp high-quality bits for drilling in

concrete (use the bit supplied with the tool as

reference )

• When drilling ferrous metals

- pre-drill a smaller hole, when a large hole is required

- lubricate drill bit occasionally with oil

• Splinterfree drilling in wood #

• Dustfree drilling in walls $

• Dustfree drilling in ceilings %

• Drilling in tiles without skidding ^

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially ventilation

slots H 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol & will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that the product

described under “Technical data” is in conformity with the

following standards or standardization documents: EN

60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU

10

15.08.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 95 dB(A) and the sound

power level 106 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (hand-arm method; uncertainty K = 1.5 m/s²)

✱ when impact drilling in concrete 19,2 m/s²

✱ when drilling in metal 3,6 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Perceuse à percussion 6950

INTRODUCTION

• Cet outil est conçu pour les travaux de perçage de

percussion dans la brique, le béton et dans la pierre

naturelle ainsi que le perçage dans le bois, le métal, la

céramique et les matières plastiques

• Cet outil n’est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur de marche/arrêt et réglage de vitesse

B Bouton de blocage de l’interrupteur

C Levier pour inverser le sens de rotation

D Commutateur pour sélectionner le mode de

fonctionnement

E Indicateur de fonction

F Douille de verrouillage

G Poignée auxiliaire

H Fentes de ventilation