Binatone RL-595: BEFORE USING THE APPLIANCE OPERATING INSTRUCTIONS

BEFORE USING

THE APPLIANCE

Charging the rechargeable

batteries of the lantern

Take the cable out of the cable storage com-

partment (9) and insert the plug into the AC

socket. The rechargeable battery condition in-

dicator of the red light (4) will come on indicating that the built-

in rechargeable battery started to charge.

You can use the electric network of a car to charge the lantern of

RL-595 model having the slot for 12 V (DC) power supply

connection.

Warning: charge the rechargeable batteries for 20-24 hours

before the first use. 24 hour charging of the batteries is

also needed after 4 hours of continuous work.

Note: recharge the batteries after each use and after long

(more than 3 months) period of storage. Otherwise

the rechargeable batteries may become unfit for use.

Note: always charge the batteries of the lantern, if light

is getting dim.

OPERATING INSTRUCTIONS

Using the appliance as the lantern

of steady light

With electric network connection

X Connect the cable to the electric network

and set the operation mode switch (5) to «AC». The recharge-

able battery condition indicator of the red light (4) will come

on indicating that the built-in rechargeable battery started to

charge.

X You can switch the lantern on and off by pulling the rope

switch (7). When the RL-590 model is switched on, the indica-

tor of electric network connection of the green light (13) will

also come on.

Without electric network connection

X Unplug the appliance from the power socket and set the op-

eration mode switch (5) to «AC» or «ON» . The lantern will

be powered by the charged battery.

X You can switch the lantern on and off by pulling the rope

switch (7).

6