Yamaha DV-C6860: Setup Menu

Setup Menu

PCM ONLY

English

Setting the analog output

Select this only if your receiver is not

Set the analog output to match the

capable of decoding multi-channel audio

playback capability of this unit.

signals.

1 In “AUDIO SETUP PAGE”, press 3 / 4 to

Note:

highlight [ANALOG OUTPUT], and then

– If your receiver cannot decode DTS, no

press 2.

sound output from DTS signals in any

STEREO

mode.

Select this to change the channel output to

stereo, which only delivers sound from the

LPCM OUTPUT

two front speakers.

Select this if you have connected this unit

LT/RT

to a PCM-compatible receiver via a digital

Select this if this unit is connected to a

terminal, such as the coaxial terminal. In

Dolby Pro Logic decoder.

this case, you may need to adjust “LPCM

OUTPUT”.

2 Press 3

/ 4 to select a setting, and then

Discs are recorded at a certain sampling

press ENTER/OK to confirm your

rate. The higher the sampling rate, the

selection.

better the sound quality.

48KHz

Setting the digital output

Select this to play back discs recorded at

The [DIGITAL AUDIO] options are:

the sampling rate of 48 kHz. All 96 kHz

“DIGITAL OUTPUT” and “LPCM

PCM data streams (if available) are

OUTPUT”.

converted to the sampling rate of 48 kHz.

1 In “AUDIO SETUP PAGE”, press 3

/ 4 to

96KHz

highlight [DIGITAL AUDIO], and then

Select this to play back discs recorded at

press 2.

the sampling rate of 96 kHz. If the 96 kHz

2 Press 3

/ 4 to highlight an option.

disc is copy protected, the digital output is

3 Press 2 to enter a submenu.

automatically converted to the sampling

rate of 48 kHz.

DIGITAL OUTPUT

4 Press 3

/ 4 to select a setting, and then

Set the digital output according to your

press ENTER/OK to confirm your

optional audio component connections.

selection.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital

audio output jack to a multi-channel

decoder/receiver.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

23 En