Siemens ET375GA11E: Care and cleaning
Care and cleaning: Siemens ET375GA11E
Table of contents
- Table of contents
- Important information Before installation
- instructions
- How to avoid damage Before first use Accessories
- Your new appliance This is your new deep-fryer
- Temperature switch (1) Indicator light (2) Heating up light (3) Heating element
- Setting the deep-fryer Notes regarding the deep frying oil or fat Deep frying
- Safety switch-off
- Draining the deep frying oil or fat
- Tables and tips Settings table Food Quantity Temperature Time in min. Remarks
- Food Quantity Temperature Time in min. Remarks
- Tips and tricks
- Care and cleaning
- 32
- After-sales service
31
Care and cleaning
Do not use high-pressure or steam jet cleaning
devices.
Caution, risk of burns! Wait until the appliance has
몇
cooled down completely before cleaning it.
Caution, risk of burns! Never switch on the deep
몇
fryer while the heating element is tilted up.
Cleaning the deep fryer
After draining the oil, remove coarse soiling in the
frying basin with kitchen paper.
Fill up the frying basin to the lower marking with
warm water and added detergent. Clean the frying
basin and the heating element using a soft brush.
Avoid scratching or scrubbing as this could cause
permanent scratches.
Tilt up the heating element so that it clicks into the
bracket. Then you can clean the bottom of the frying
basin under the heating element.
Drain the water, lower the heating element so that it
is on the base of the basin and rinse with clear
water. Important: Do not leave any cleaner residues
in the frying basin. Dry the frying basin and the
heating element with a soft cloth.
