Binatone MRFP-8807: BEFORE USE OPERATING INSTRUCTIONS

6. Rubber feet

7. Adapter

8. Actuator

9. Dough kneading tip

10.Mincer

11.Double-sided tip with a coarse grate for coarse shredding

12.Double-sided tip with a fine grate for fine shredding

13.Knife for cutting French fries

14.Blade

BEFORE USE

Before the first use of the appliance, thor-

oughly wash all components which will contact

with food products. Wipe with a soft damp cloth

the casing (4) of the appliance.

OPERATING INSTRUCTIONS

1. Put the cup (3) on the appliance casing (4).

Fix the kitchen machine cup (3) by turning coun-

terclockwise up to the stop.

2. Fix the required tip in the cup (3): use the

adapter (7) which is mounted on the actuator

(8) for the shredders (11, 12, 13); for the tips

(9, 10), the adapter (7) is not required.

3. Close the cup (3) with the lid (2). Turn the lid

counterclockwise and match the mark on the lid with the arrow

of the cup handle. Make sure that all components of the appli-

ance are properly installed. If the cup (3) or the lid (2) are

installed improperly, the appliance will not switch on.

4. Load the food products through a special loading opening in

the lid (2). Use the pushrod (1) for pushing products through

the loading opening. During the operation, you may use the

pushrod (1) to cover the loading opening to prevent the splash-

out of liquid or food product chips.

Attention: if the kitchen machine suddenly stopped

operating, press the knob «0» to switch off the

appliance, unplug the appliance from the power grid

and allow it cool down within 15 minutes. After

that, switch it on again.

5. Use the mode selector (5) to choose the required mode of

operation («I» or pulse «Pulse»). After completion of the work,

press «0» to switch the appliance off, and unplug the power

cord from the power grid.

6. The appliance mills the products very quickly. To avoid exces-

sive milling of ingredients, each time switch on the appliance

for a short period of time.

7. Use mode «I» either for grating soft vegetables and fruit, or

slicing solid products. Use the pulse mode («Pulse») for milling

6