Binatone MRE-8804: BEFORE THE FIRST USE OPERATING INSTRUCTIONS Espresso Preparation

BEFORE THE FIRST USE

 Make sure that the appliance stands reliably

on a flat surface.

 Before using the appliance for the first time,

wash thoroughly the water reservoir (14), the

water reservoir lid (13), the removable drip

tray (9) and the removable grate (8) with hot

soapy water, then rinse and wipe them.

 Wash the metal filter (16) and the filter holder (12) with

running water and dry.

 Wipe the coffee maker body (4) with damp soft cloth.

 To clean the internal parts of the coffee maker, take the espresso

preparation steps, using water only. Do not place coffee

into the filter!

OPERATING INSTRUCTIONS

Espresso Preparation

1. Install the drip tray (9) and the grate (8) into

the base of the coffee maker.

2. Fill the water reservoir (14) with cold water.

Install the water reservoir (14) on the coffee

maker body (4) and cover with the lid (13).

3. Plug the appliance into an outlet having voltage corresponding

to the information indicated on the appliance. Turn the coffee

maker on, using the “ON” button (7). The “ON” indicator will

light (10).

Warning: never turn on the appliance containing no water!

4. Insert the selected metal filter (16) into the filter holder (12).

Place ground coffee into the metal filter (16), using the mea-

suring spoon (15). Ram the coffee with the bottom part of the

measuring spoon (15).

5. Insert the holder (12) containing the filter into the filter holder

fixing projection (5) and fix the filter holder by turning it

anticlockwise.

6. Place a coffee cup on the removable grate (8) under the filter

holder.

Note: it is recommended that the coffee cup should be

heated prior to using. For this purpose, place the cup

turned upside-down on the cup heating plate (1).

7. When the water heating indicator (2) lights, turn the operat-

ing mode switch (3) to the “cup” position. The coffee brewing

process will start.

8. When a desired amount of coffee is collected in the cup, turn

the operating mode switch to the “O” position.

9. Turn the coffee maker off, unplug it from the outlet and allow

to cool. After the coffee maker has cooled down, remove the

filter holder (12) and then remove the coffee grounds from

the filter (16).

6