Binatone KS-7030: Setting the timer Warning indications MAINTENANCE AND CLEANING DISPOSAL

the time setting mode.

2. Press the “Mode” button (4) once again and hold it for 2-3 sec-

onds till the two right digits (minutes) begin blinking.

3. Set minutes pressing repeatedly the “Unit” button (5).

4. Press the “Mode” button (4) once again. The two left digits (hours)

begin blinking.

5. Set hours pressing repeatedly the “Unit” button (5).

6. After the time setting procedure is complete press the “Mode” but-

ENGLISH

ton (4).

Setting the timer

1. The scale is equipped with an alarm timer up to 100 minutes. To

set the timer press the “Mode” button (4) till TMR appears in the

right portion of the display (2). This means that the device entered

the timer setting mode.

2. Press the “Mode” button (4) once again and hold it for 2-3 sec-

onds till the two right digits (seconds) begin blinking.

3. Set seconds pressing repeatedly the “Unit” button (5).

4. Press the “Mode” button (4) once again. The two left digits (min-

utes) begin blinking.

5. Set minutes pressing repeatedly the “Unit” button (5).

6. After the timer setting procedure is complete press the “Mode”

button (4).

7. After the set time expires an audible alarming signal will be gen-

erated. Press the “Mode” button (4) to turn off the signal. Press

this button once again to return to the time mode.

Warning indications

Figure C:

a. Battery should be replaced.

b. The device is overloaded. Remove excessive weight.

MAINTENANCE AND

CLEANING

1. Wipe the device with a damp lint free cloth.

Avoid penetration of water into the device. Do

not use alcohol, gasoline and harsh abrasive

substances for cleaning

2. Keep the device in a dry cool place. Avoid keep-

ing the device in places with high moisture or

elevated temperature.

DISPOSAL

Upon expiry of the service life of this appliance

it should be disposed of in accordance with waste

disposal regulations in your country and with the

least damage to the environment.

Only ecologically safe materials are used in

the packaging of our products and the cardboard

and paper can be disposed of with normal paper

waste.

7