Skil 1550 AA: DECLARATION OF CONFORMITY APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT NOISE/VIBRATION

! 

electric tools that have reached the end of their life

the chip outlet while knives are rotating

must be collected separately and returned to an

 Park rest H ⑨

environmentally compatible recycling facility

- protects workpiece from damage when tool is put

- symbol ⑫ will remind you of this when the need for

aside

disposing occurs

- will automatically fold backwards when planing

 Operating the tool

DECLARATION OF CONFORMITY

- adjust planing depth

 We declare under our sole responsibility that the product

- place tool on workpiece

described under “Technical data” is in conformity with

! ensure that only the front shoe rests on the

the following standards or standardization documents:

workpiece and that the knives do not touch it

EN 60745, EN 61000, EN 55014, in accordance with the

- switch on the tool by rst pressing knob J ② (= safety

provisions of the directives 2004/108/EC, 2006/42/EC,

switch which cannot be locked) and then pulling

2011/65/EU

trigger K ②

 : SKIL Europe BV (PT-SEU/ENG1),

! 

4825 BD Breda, NL

should run at full speed

! 

coloured grip area(s) ⑩

- hold the tool rmly with both hands and guide it

forward in a continuous stroke

- use the tool with its base-plate on the workpiece

- do not tilt the tool in order to avoid unwanted planing

marks

! 

from the workpiece

- switch o the tool by releasing trigger K

APPLICATION ADVICE

 When planing one may use a dust bag (SKIL accessory

2610394020)

 For chamfering edges use the V-grooves in the front

shoe ⑪

- select one of the 2 V-grooves L

- set knob D to position "0" for chamfering edges similar

to selected groove

- for larger grooves turn knob D to select the required

planing depth

! 

 For more tips see www.skil.com

MAINTENANCE / SERVICE

 This tool is not intended for professional use

 Always keep tool and cord clean (especially ventilation

slots M ②)

! 

 If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

 Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

7

NOISE/VIBRATION

 Measured in accordance with EN 60745 the sound

pressure level of this tool is 83 dB(A) and the sound

power level 94 dB(A) (standard deviation: 3 dB), and

the vibration 3.9 m/s² (hand-arm method; uncertainty K

= 1.5 m/s²)

 The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 



keeping your hands warm, and organizing your

work patterns

 1550

INTRODUCTION

 Cet outil est conçu pour le rabotage des matériaux

en bois, tels que des poutres et des plances; il est

également approprié pour chanfreiner

 Cet outil n'est conçu pour un usage professionnel

 Lisez et conservez ce manuel d’instruction ③

CARACTERISTIQUES TECHNIQUES ①