Siemens DE2427555: Conserving energy and water at the touch of a button

en

Conserving energy and water at the touch of a button

Mixing in of cold water in the fitting requires unnecessary water and energy. You should therefore set the

desired water flow directly on the continuous-flow heater and then open the water tap.

In “eco” program mode the appliance is operated economically.

Press the ■ button to switch it on.

l/min

The preset flow is 7 l/min, the temperature setting is 42 °C (factory

settings).

Personal “eco” program setting

The preset flow can also be modified.

l/min

■ for at least 3 seconds, on the display the fac-

Press button

tory setting 7.0 l/min appears and

flashes quickly.

■

Using the rotary knob you can set the desired water flow be-

tween 3.5 l/min to 7.5 l/min in steps of 0.5 l.

■ pressed for at least 3 seconds and the setting

Keep button

will be stored.

Info: After about three seconds the display will indicate the current

water temperature of 42 °C and

shows that it is activated.

l/min

Changing the “eco” program temperature

When the “eco” program is switched on, the preset temperature of 42 °C can be made warmer or colder.

■

Select the desired temperature with the rotary knob.

Info: The customized settings in the “eco” program are only active as long as is switched on. The settings

of the

program are maintained if another program or mode is selected.

16