Binatone NHM-7706: OPERATING INSTRUCTIONS CARE AND CLEANING USEFUL ADVICES

OPERATING INSTRUCTIONS

1. Select the attachments you intend to use.

2. Before fixing the attachments, check that the

speed selector (2) is in position «0» and the

power cord (8) is disconnected from the supply

outlet.

3. Attachment (5), can be fixed in random or-

der. Fix them into apertures for attachments (7)

till a click is heard.

4. Before switching the appliance on, make sure that both at-

tachments are fixed properly!

5. Connect the appliance to the power outlet and set the speed

selector (2) to the desired setting to start operation of the

machine. Always start operating the machine at the lowest

speed gradually increasing the speed.

6. At the end of the operation set the speed selector (2) to «0»

position and switch the unit off the power supply.

7. Remove excessive products from attachments by a plastic or

wooden scapula.

8. Push the button of automatic ejection of attachments (3) to

take them out of the housing (1).

CARE AND CLEANING

1. Always disconnect the unit from the power

outlet before cleaning.

2. Rub the housing (1) and the power cord (8)

of the machine with damp cloth and then rub it

dry.

3. Wash the attachments (5,6) in warm water

with detergent and dry them. Attachments may

be washed in a dishwashing machine.

Note: never immerse the appliance’s housing (1) and the

power cord (8) into water.

USEFUL ADVICES

X To achieve homogeneous substance move the

whisks inside the bowl along its perimeter. If it is

necessary to clean the bowl in which you prepare

food from remnants of non-mixed products stop

the appliance and remove remnants of products

from the walls of the bowl with a scoop. After that

continue operating the mixer according to the se-

lected regime.

X It is recommended to use beating whisks (5) to prepare pud-

dings, puree, mobile dough (for example, pancake dough),

to beat cream and egg whites (fro example, to prepare kiss.

Selection of the speed regime:

6