Главная > Инструкция к Телефону ZyXEL Communications v500 series > " You can also use the alphanumeric keypad to make your selections in the

ZyXEL Communications v500 series: " You can also use the alphanumeric keypad to make your selections in the

" You can also use the alphanumeric keypad to make your selections in the : ZyXEL Communications v500 series

ENGLISH

2.1 Set up Your Network Connection

When you have finished your hardware

11:45 2008-12-12

connections, look at the LCD screen. The V500

SIP 1

displays your Voice over Internet (VoIP) account

registration status in the tabs on the right, and time

and date details in the top section.

Unused

The V500 allows you to configure up to four VoIP

ZyXEL

Unused

accounts (also known as SIP accounts). When a

VoIP account is not active, Unused displays. When

Unused

an account is active but not successfully

registered, No Reg displays in the tab. When an

account is active and successfully registered, the

tab displays the account name (SIP 1 in this

example).

V If the LCD screen displays nothing, recheck your hardware connections.

See section 1.2.

Follow these steps to configure your network settings.

1 Press the Menu key, and use the navigator to

Menu Setting

select Advanced Setting. Press Select.

1 System Info

2 Ring Setting

3 Volume Setting

4 Call Preference

5 Phonebook

6 Advanced Setting

7 System Restart

8 Logo Setting

Select Back

" You can also use the alphanumeric keypad to make your selections in the

LCD screen. For example, you can press the 6 key in the Menu Setting

screen (above) to go to the Advanced Setting screen.

9

ENGLISH

2 Select Network Setting.

Advanced Setting

Choose from the following options:

1 Network Setting

• If you were given a username and password for

2 SIP Configuration

network access, go to section 2.1.1 on page 10.

3 Auto Provision (Off)

• If you were given an IP address and subnet mask

4 Programmable Key

to use, go to section 2.1.2 on page 12.

5 Display Adjusting

6 Call Feature Mode

• If you were not given an IP address to use, go to

section 2.1.3 on page 12.

7 Language Support

Select Back

2.1.1 Set Up PPPoE

1 If you were given a username and password,

Network Setting

select PPPoE (Off) in the Advanced Setting >

1 PPPoE (On)

Network Setting menu. Press the On softkey to

2 Static IP (Off)

have the V500 use PPPoE.

3 DHCP (Off)

The screen displays PPPoE (On). Press Select

to enter your information.

Select On Back

2 Press 1 to enter the user name for your

PPPoE

account.

1 Username

2 Password

Select Back

10

ENGLISH

3 The PPPoE Username screen displays. Press

PPPoE Username Number

Edit and enter your user name. (Press the #

key to cycle between Number, Uppercase,

Current:

Lowercase and Symbol entry mode.)

New: User123

Press Save when you are done, then press 2 to

enter the PPPoE Password screen. Press Edit.

Save . <- Back

4 Enter your password, then go down to Confirm

Edit Password Lowercase

and re-enter it. Press Save when you are done.

Current:

New: NewPassword

Confirm: NewPassword

Save <- Back

11

Оглавление

Топ 10 инструкций

Другие инструкции

Philips myLiving Lampada da soffitto Philips myLiving Lampada da soffitto ZyXEL Communications NBG-415N ZyXEL Communications NBG-415N ZyXEL Communications V500-T1 ZyXEL Communications V500-T1 Phottix Mitros for Nikon Phottix Mitros for Nikon