Villaware INSTRUCTION MANUAL FPVLJESLO1: foru.k.andirelandonly

3

foru.k.andirelandonly

If the plug is not suitable for the socket outlets in your home, it can be removed and

replacedbyaplugofthecorrecttype.Pleasereferto“Installationofaplug”below.

Installation of a plug applicable to U.K. and Ireland.

WARNING - THIS APPLIANCE MUST BE EARTHED

NOTE:

If the terminals in the plug are not marked or if you are unsure or in doubt about

theinstallationoftheplug,pleasecontactaqualiedelectrician.Ifa

1

3A 3-pin plug is fitted,

it must be an ASTA approved plug, conforming to BS

1

363standard.

Replacement5AfusesmustbeBS

1

or ASTA BS

1

362approved.

The wires in the mains lead are coloured as such:

GREENANDYELLOW-EARTH

BROWN-LIVE

BLUE-NEUTRAL

Please note that the colour of these mains wires may not correspond with the colour

markingsthatidentifytheterminalsinyourplug.

Please proceed as follows:

ThewirewhichiscolouredGREENANDYELLOWmustbeconnectedtotheterminal

whichismarkedwiththeletter“E”orbytheearthsymbol“”orcolouredGREENAND

YELLOW.

TheBROWNcolouredwiremustbeconnectedtotheterminal,whichismarkedwiththe

letter“L”oriscolouredRED.

The BLUE coloured wire must be connected to the terminal, which is marked with the

letter“N”oriscolouredBLACK.