Skil 7405 AA: APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT DECLARATION OF CONFORMITY NOISE/VIBRATION

! do not apply too much pressure on the tool; let

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

the sanding surface do the work for you

4825 BD Breda, NL

- guide the tool parallel to the working surface and move

it in circles or in a cross pattern

- do not tilt the tool in order to avoid deep unwanted

sanding marks

- keep ventilation slots K 2 uncovered

• Sanding

- the amount of material removed is determined by the

speed of the sanding disc

- the speed of the sanding disc decreases relative to the

pressure applied to the tool

• Auxiliary handle

- loosen nut J almost completely

- push down handle H into desired position

- tighten nut rmly

APPLICATION ADVICE

• For determining the right grit table 7 can be used as

reference

! always test out first on a piece of scrap material

• Remove dust skirt D for sanding hard-to-reach places 8

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots K 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 9 will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that the product

described under “Technical data” is in conformity with the

following standards or standardization documents: EN

60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU

7

15.08.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 81 dB(A) and the sound

power level 92 dB(A) (standard deviation: 3 dB), and the

vibration 3,1 m/s² (hand-arm method; uncertainty

K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Ponceuse excentrique 7405

INTRODUCTION

• Cet outil est conçu pour le ponçage à sec du bois,

plastique, métal et mastic et des surfaces peintes

• Cet outil n’est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Support plateau

B Vis du support plateau

C Disque de ponçage

D Jupe à poussière

E Sac à poussière

F Interrupteur marche/arrêt

G Bouton de verrouillage de l’interrupteur marche/arrêt

H Poignée auxiliaire

J Ecrou papillon pour régler la poignée auxiliaire

K Fentes de ventilation