Skil 1558 AA: DECLARATION OF CONFORMITY NOISE/VIBRATION APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT
DECLARATION OF CONFORMITY NOISE/VIBRATION APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT: Skil 1558 AA
Table of contents
- INTRODUCTION TECHNICAL SPECIFICATIONS ① 3) PERSONAL SAFETY TOOL ELEMENTS ② SAFETY 1) WORK AREA SAFETY 2) ELECTRICAL SAFETY
- DURING USE AFTER USE 5) SERVICE GENERAL USE BEFORE USE
- DECLARATION OF CONFORMITY NOISE/VIBRATION APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT
Operating the tool
DECLARATION OF CONFORMITY
- adjust planing depth
We declare under our sole responsibility that this
- place tool on workpiece
product is in conformity with the following standards
! ensure that only the front shoe rests on the
or standardized documents: EN 60745, EN 61000,
workpiece and that the knives do not touch it
EN 55014, in accordance with the provisions of the
- switch on the tool by rst pressing knob H ② (= safety
directives 2004/108/EC, 2006/42/EC, 2011/65/EU
switch which cannot be locked) and then pulling
: SKIL Europe BV (PT-SEU/ENG1),
trigger J ②
4825 BD Breda, NL
!
should run at full speed
!
coloured grip area(s) ⑨
- hold the tool rmly with both hands and guide it
forward in a continuous stroke
- use the tool with its base-plate on the workpiece
- do not tilt the tool in order to avoid unwanted planing
marks
!
NOISE/VIBRATION
from the workpiece
Measured in accordance with EN 60745 the sound
- switch o the tool by releasing trigger J
pressure level of this tool is 90 dB(A) and the sound
power level 101 dB(A) (standard deviation: 3 dB), and
APPLICATION ADVICE
the vibration 5.1 m/s² (hand-arm method; uncertainty K
= 1.5 m/s²)
For chamfering edges use the V-groove in the front shoe
The vibration emission level has been measured in
⑩
accordance with a standardised test given in EN 60745;
- set knob D to position "0" for chamfering edges similar
it may be used to compare one tool with another and as
to groove
a preliminary assessment of exposure to vibration when
- for larger grooves turn knob D to select the required
using the tool for the applications mentioned
planing depth
- using the tool for dierent applications, or with dierent
!
or poorly maintained accessories, may signicantly
For more tips see www.skil.com
increase the exposure level
- the times when the tool is switched o or when it is
MAINTENANCE / SERVICE
running but not actually doing the job, may signicantly
This tool is not intended for professional use
reduce the exposure level
Always keep tool and cord clean (especially ventilation
!
slots L ②)
!
keeping your hands warm, and organizing your
If the tool should fail despite the care taken in
work patterns
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
1558
the tool are listed on www.skil.com)
INTRODUCTION
ENVIRONMENT
Cet outil est conçu pour le rabotage des matériaux
en bois, tels que des poutres et des plances; il est
Do not dispose of electric tools, accessories and
également approprié pour chanfreiner
packaging together with household waste material
Cet outil n'est conçu pour un usage professionnel
(only for EU countries)
Lisez et conservez ce manuel d’instruction ③
- in observance of European Directive 2002/96/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
SPECIFICATIONS TECHNIQUES ①
electric tools that have reached the end of their life
must be collected separately and returned to an
②
environmentally compatible recycling facility
- symbol ⑪ will remind you of this when the need for
A Rangement pour la clé
disposing occurs
B Boulon de xation
C Vis de l΄arbre porte-couteaux
D Bouton de réglage de la profondeur de rabotage
E Indicateur de la profondeur de rabotage
F Adaptateur de l’aspirateur
G Evacuation copeaux
7
