Binatone SI-2600: Turbo steam Burst of steam in a vertical position Spray CARE AND MAINTENANCE Cleaning of the sole plate Cleaning of internal parts of the appliance

put the steam control knob (9) into the “0” position

prior to ironing at low temperatures.

Turbo steam

To ease ironing of dense cotton, linen and upholstery articles

use the steam burst button (8): engagement of the button (8)

during the ironing process generates an extra burst of steam from

the sole plate to help remove stubborn creases.

ENGLISH

Burst of steam in a vertical position

This function helps to freshen the appearance of curtains, jack-

ets, coats, etc. To use this function, take the following steps:

 Follow instructions in paragraph 1-4 of the section “Operation

instructions”. While selecting the temperature setting, put the

temperature control knob (10) into the “Max” position.

 While holding the iron in a vertical position, aim its sole plate

towards the articles to be ironed and push the steam burst

button (8) to produce a directional strong burst of steam from

the sole plate. Push the button several times with 5-7 seconds

intervals until the article is fully refreshed. If during the process

your water tank (5) runs out of water, disconnect the appliance

from the mains outlet, wait till it cools down, refill the tank and

plug the appliance back into the power supply and continue the

process.

Spray

Using the water spray (7) will help when ironing details of the

article (cuffs, trimmings, plackets, etc) or clothes, which demand

“·” (low temperature) ironing, when steam ironing is not possible.

Push the button several times to moisten the material.

5. When you have finished cleaning or ironing, do not forget to

switch the iron off by putting the steam control knob (9) into

the “0” position, the temperature control knob (10) — into

the “Min” position and unplugging the appliance from the

mains supply outlet.

CARE AND MAINTENANCE

Cleaning of the sole plate

 The scale on the sole plate can be removed

with a rough cotton cloth dampened with a

vinegar solution.

 Do not use any abrasive substances and

materials to clean the sole plate.

Cleaning of internal parts of the appliance

SI-2610 iron is equipped with an anti-scale function which

protects it from an accumulation of scale: it does this with a built-in

permanent filter. Therefore the water hardness is reduced and

the useful service life of the iron is extended.

Warning: in areas with very hard water it is recommended

that you regularly remove scale from the appliance to

7