Binatone MGR-3030: BEFORE USE DIRECTIONS FOR USE

15.Adapter for fixing the graters

16.Pusher for using the graters

17.Coarse grater

18.Fine grater

19.Shredder

20.Power cord storage compartment

BEFORE USE

 Remove all packing materials from the ap-

pliance.

 Wipe the housing with a damp lint free

cloth and wash all parts to be in contact with

food.

 Rinse the washed parts of the appliance

with clean water and completely dry them be-

fore assembling.

DIRECTIONS FOR USE

Assembling

1. Insert the screw (8) into the operating unit

(5).

2. Put the cross-shaped cutter (9) on the end of

the screw (8) so that the rounded tip of the

cutter (9) is facing the screw (8). Make sure the

cross-shaped cutter (9) is properly fixed.

3. Place the selected perforated disc (10) on top of the cutter (9)

so that the projections on the disk fit the slots in the operating

unit (5).

4. Tighten the seal ring (11).

5. To attach the operating unit (5) to the housing (1) insert it into

the opening in the grinder’s housing, match the arrow on the

operating unit (5) with the symbol on the housing, push

gently and turn anticlockwise to match the arrow on the oper-

ating unit (5) with the symbol on the housing (Picture B)

6. Place the tray (7) on top of the funnel of the operating unit

(5). Now the grinder is ready for operation.

Dismantling

1. Push gently on the operating unit (5), turn it clockwise to

match the arrow on the operating unit (5) with the symbol

on the housing. Remove the operating unit (5) from the motor.

2. Untwist the seal ring (11).

3. Remove the perforated disk (10) and cross-shaped cutter (9)

from the screw(8). Remove the screw (8) from the operating

unit (5).

Use of the applinace

1. Place the grinder on a dry, smooth flat horizontal surface.

2. Remove the meat from the package. Cut out all bones and

6