Binatone JE-8100: BEFORE USING THE APPLIANCE OPERATING INSTRUCTIONS

BEFORE USING

THE APPLIANCE

 Thoroughly read these instructions.

 Remove all packing materials from the appli-

ance.

 Wipe the appliance body with soft damp cloth,

thoroughly wash all the appliance parts coming

into contact with food.

OPERATING INSTRUCTIONS

1. Place the juice extractor on dry level sur-

face. Make sure than the switch (11) is in the

«0» position.

2. Install the pulp container (12), by matching

the projections on the appliance body with

grooves on the pulp container (Figure B).

3. Put the separating unit (5) on the juice ex-

tractor body (10).

4. Put the grater/filter (4) on top of the separating unit (5) so

that it completely fits into the separating unit (5) and is fixed on

the motor unit (7). Check that the grater/filter (4) rotates

freely. Put the lid (3) on top.

Note: during disassembly always remove the grater/filter

(4) together with the separating unit (5).

5. Insert the feeder tube (2) into the lid opening matching the

projections on the feeder tube with the lid grooves and lock

the feeder tube (2) by turning it counterclockwise. The hook

on the feeder tube should face the safety lock (9).

6. Lift the safety lock (9) so that it locks on the hook of the feeder

tube (2).

Note: the juice extractor has a safety system. If the safety

lock (9) is not securely fastened, the appliance will

not operate.

7. Place the juice cup (13) under the separating unit’s spout (6).

If desired, you can use for juice collecting any suitable.

Disassembly

1. Make sure that the appliance is switched off and unplugged

from electrical outlet.

2. Lower the safety lock (9) holding the safety lock button (8).

3. Remove lid (3) together with the feeder tube (2). Take out the

feeder tube (2) by turning it clockwise. Then remove the sepa-

rating unit (5). The grater/filter (4) comes away together with

the separating unit.

4. Unfasten the pulp container (12).

6