Binatone JE-556: BEFORE USE INSTRUCTIONS FOR USE Disassembling Assembling

BEFORE USE

 Read this instruction carefully.

 Remove all packaging materials.

 Check whether the voltage shown on the label

of your juice extractor is the same as that of

your home power supply.

 Before first using your juice extractor, carefully

wash and dry all parts that will come into con-

tact with food.

 Check whether the appliance is assembled correctly (see Assem-

bling section).

INSTRUCTIONS FOR USE

Disassembling

1. Make sure the appliance is switched off and un-

plugged.

2. Open the safety clips (4), remove the top cover

(3) and the separator (6) with the cutter/

strainer (9).

Note: when disassembling the appliance, always remove the

cutter/strainer (9) together with the separator (6).

Assembling

1. Put your juice extractor on a dry clean horizontal surface.

2. Install the separator (6) on the juice extractor casing (10) so that

the side guides of the separators fit into the grooves on the casing.

3. Install the cutter/strainer (9) on top of the separator (6) so that its

connected to the cutter/strainer drive (11) and can rotate freely.

4. Put the top cover (3) of the juice extractor on and close the safety

clips (4).

Note: The juice extractor has a safety device. If the top

cover (3) or safety clips (4) are not locked properly,

the appliance will not function. It will automatically

switch off in case it unlocks in the course of the juice

extractor operation.

5. Place the pulp container (14) under the pulp outlet (8), then place

the juice cup with the foam separator (13) under the separator

spout (6). The foam separator efficiently separates foam from juice.

The extracted juice will be collected in the juice cup (13). Pour the

juice into another cup before serving, so that the foam stays in the

bottom of the juice cup. You may also use any other container of

appropriate size to collect juice instead of the juice cup (13).

6. Install the food tray (2) on top of the food chute (5) to put fruit and

vegetables on it in the course of juice extraction. As the shape of

the food tray (2) exactly matches the shape of the top cover (3),

you can use it as a cover by turning the tray upside down before

placing the appliance for storage.

6