Skil 4581 CA: DECLARATION OF CONFORMITY APPLICATION ADVICE MAINTENANCE / SERVICE ENVIRONMENT NOISE/VIBRATION

- 4 settings for fast cutting in dierent materials, straight

- in observance of European Directive 2002/96/EC on

cuts only

waste of electric and electronic equipment and its

1 = metal

implementation in accordance with national law,

2 = plastic

electric tools that have reached the end of their life

3 = hard wood

must be collected separately and returned to an

4 = soft wood

environmentally compatible recycling facility

! always select “0” when sawing splinter-sensitive

- symbol * will remind you of this when the need for

material

disposing occurs

• Dust suction !a

! do not use vacuum cleaner when cutting metal

DECLARATION OF CONFORMITY

• Dust blowing !b

• We declare under our sole responsibility that the product

• Saw blade storage @

described under “Technical data” is in conformity with the

! for T-shank blades only

following standards or standardization documents: EN

• Spot light #

60745, EN 61000, EN 55014, in accordance with the

• Operating the tool

provisions of the directives 2004/108/EC, 2006/42/EC,

- before switching on the tool, ensure that front end of

2011/65/EU, 2009/125/EC (EU regulation 1194/2012)

footplate rests at on the workpiece

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

- hold tool rmly with both hands, so you will have full

4825 BD Breda, NL

control of the tool at all times

! while working, always hold the tool at the

grey-coloured grip area(s) $

- ensure that complete surface of footplate rests rmly

on the workpiece

! ensure that the blade has come to a complete

standstill, before you lift the tool from the

workpiece

- keep ventilation slots J 2 uncovered

APPLICATION ADVICE

• Use the appropriate saw blades %

! tool accepts most commonly available T-shank

and U-shank blades ^

• When cutting metals, lubricate saw blade regularly with

oil

• Pre-drill a hole before making cut-outs &

• Splinter-free cutting

- cover cutting-line with several layers of wide tape

before cutting

- always face the good side of the workpiece down

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots J 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

11

09.09.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 89 dB(A) and the sound

power level 100 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (hand-arm method; uncertainty K = 1.5 m/s²)

✱ when cutting wood 12.7 m/s²

✱ when cutting metal 9. 2 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Scie sauteuse 4581

INTRODUCTION

• Cet outil est conçu pour eectuer des découpes et

coupes dans le bois, les matières plastiques, le métal, les

plaques en céramique et le caoutchouc, et est approprié