Skil 1415 AC: ENVIRONMENT DECLARATION OF CONFORMITY MAINTENANCE / SERVICE NOISE/VIBRATION

! before switching off the tool, you should lift it

ENVIRONMENT

from the workpiece

• Do not dispose of electric tools, accessories and

• Speed control 8

packaging together with household waste material

For optimal results on dierent materials

(only for EU countries)

- select speed with wheel G (also while tool is running)

- in observance of European Directive 2002/96/EC on

- use table 9 as reference for determining the right

waste of electric and electronic equipment and its

speed

implementation in accordance with national law,

- before starting a job, nd the optimal speed by testing

electric tools that have reached the end of their life

out on spare material

must be collected separately and returned to an

! after longer periods of working at low speed, allow

environmentally compatible recycling facility

the tool to cool down by running it for

- symbol & will remind you of this when the need for

approximately 3 minutes at high speed with no load

disposing occurs

• Holding and guiding the tool 0

- pencil grip for precision work (engraving)

- one-hand grip for less precise work (grinding)

DECLARATION OF CONFORMITY

- support grip for additional control/comfort

• We declare under our sole responsibility that the product

- do not apply too much pressure on the tool; let the

described under “Technical data” is in conformity with the

speed do the work for you

following standards or standardization documents: EN

• Support grip !

60745, EN 61000, EN 55014, in accordance with the

- can be adjusted as illustrated

provisions of the directives 2004/108/EC, 2006/42/EC,

- can be mounted in 4 dierent positions

2011/65/EU, 2009/125/EC (EU regulation 1194/2012)

• Spot light (not standard included) @

• Technical file at: SKIL Europe BV (PT-SEU/ENG1),

Switch on/o spotlight J by turning knob K counter-

4825 BD Breda, NL

clockwise/clockwise

• Flexible shaft (not standard included) #

- mount exible shaft as illustrated

- use exible shaft for hard-to-reach places

Changing accessories when using exible shaft $

- pull sleeve L down (= lock spindle) and hold it while

you turn collet nut D by hand until the spindle lock

prevents further rotation and loosen collet nut D with

wrench E

- insert an accessory in collet C

- pull sleeve L down (= lock spindle) and hold it while

you tighten collet nut D with wrench E

• Mounting stand (not standard included) %

- mount stand on a workbench or table-top with a

maximum thickness of 60 mm

- adjust height of stand by turning tubes M counter-

clockwise, pulling them to desired height, and turning

them clockwise

- adjust height of suspension bracket N by loosening

knob P, adjusting suspension bracket to desired

height, and tightening knob P

- attach tool to suspension bracket with hook Q

• Assembly of specic accessories ^

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots H 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

11

15.08.2013

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 71 dB(A) (standard deviation:

3 dB) and the vibration 2.9 m/s² (hand-arm method;

uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns