Siemens Euroset 5020: Using functions for additional services of public telephone systems

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006

6

GB

Setting the flash time for the Recall key

Calls list

?195

The calls list includes up to 50 entries. If the same subscriber

Initiate function.

calls more than once, a new entry is not created. Up to 99

0...4 Enter desired flash code:

repeated calls are displayed in the additional information.

0: 90 ms (default setting); 1: 120 ms;

Sequence of list entries: The most recent call is displayed

2: 270 ms; 3: 375 ms; 4: 600 ms.

in the first position (position number "01"). Older entries are

? Press the Set key.

moved downwards with each new incoming phone number

until they are deleted from the list.

In the calls list

Using functions for additional services of

◆ you can scroll through the phone numbers displayed,

public telephone systems

◆ query additional information:

(a) date and time, if this is transferred from the

If you want to use services that are to be triggered with the

telephone system, otherwise only the time according to

Recall key, make sure beforehand that the correct flash time

the telephone's internal clock,

is set for the key.

(b) frequency of an incoming phone number,

◆ delete entries,

Recall key (in public telephone systems)

◆ save phone numbers from the calls list to a repertory key

In public telephone systems, this key is required to use

(see page 3),

certain additional services.

◆ dial a displayed phone number directly.

The appropriate flashtime for the specific country must be

set before using the Recall key can be used:

Viewing caller histories and dialling phone numbers

◆ Belgium, Netherlands, Switzerland: 120 ms

If there are entries in the calls list that have you have not yet

(access code 1)

seen,

| flashes in the display.

◆ France, Luxemburg, Portugal, Germany, Greece: 270 ms

You can retrieve the calls list, scroll through its entries, view

(access code 2)

additional information about a call and call back directly:

◆ other European countries: 90 ms (access code 0).

A Press the Down key.

Using Calling Line Identification

The phone number of the most recent call

appears in the display. Its position number "01"

Under the following conditions, the phone numbers of

is displayed to the left of the number.

incoming calls are

If the phone number contains more than

(a) shown on the display (up to the first 20 digits) and

17 digits, the first 17 digits will be displayed

(b) automatically saved in a calls list:

first, then the rest after one second. (You can

◆ Both your network provider and the caller's network

leave the calls list at any time by pressing

>.)

provider must offer Calling Line Identification.

To scroll through the calls list:

◆ Both you and the caller must have requested this service

A...C Press the Down/Up key.

(if necessary) from your respective network providers.

If these conditions are met, but a caller has suppressed

To view additional information:

Calling Line Identification before making the call, you will

= Press the Shift key.

see

---P--- on the display instead of the phone number. If it

The date and time of the displayed entry is dis-

has not been possible to identify the number for other (tech-

played with the number of calls (on the right).

nical) reasons, you will see

---0--- or ---E--- on the display.

Back to the calls list (calling line display):

Up to 20 digits can be shown on the display. Longer phone

= Press the Shift key again.

numbers are shown with the end of the number shortened.

Dial the phone number:

B Press OK or L key.

After 2 seconds the number is dialled.

Lift the handset if you want to talk via the

handset.