Siemens Euroset 5020: Operation on a PABX

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006

5

GB

When the telephone is locked, you will see { in the

Operation on a PABX

display.

Activate/deactivate call duration display

Enter/delete an external line prefixe

The telephone can display the approximate call duration in

If you are using your telephone on a PABX, you may have to

the display (up to 99 min. 59 sec., default setting: on). If the

save one or more external line prefixes. A dialling pause is

call duration display is activated, the time display begins

set automatically with the external line prefixe. You can save

8 seconds after the last digit is dialled.

up to three external line prefixes.

?18#

?0 Initiate function.

Initiate function.

If no external line prefixe has been set in a

0/ 1 0: deactivate; 1: activate.

location,

z

appears in the display.

If several external line prefixes are saved, these

? Press the Set key.

are displayed next to one another; the current

Setting the pause time

external line prefixe to be edited flashes.

If necessary, use the

; key to toggle

If necessary, the pause time of the Pause key ; (pause

between the external line prefixes displayed,

function from second input position) can be changed to 1,

to edit them as follows:

3 or 6 seconds (default setting: 3 seconds).

To delete an external line prefix:

?102

Initiate function.

? Press the Set key.

0...2 0: 1 sec.; 1: 3 sec.; 2: 6 sec..

To enter an external line prefixe:

? Press the Set key.

o Enter a one- to three-digit code.

Enter additional external line prefixes:

Changing the dialling mode

; o Press the Redial key, enter next external line

?# Initiate function.

prefixe.

1/ 2 1: Tone dialling.

? Press the Set key.

2: Pulse dialling without flash function.

? Press the Set key.

Recall key (on a PABX)

During an external call, you can make a recall or divert the

Changing dialling modes during a call

call. To do this, press the Recall key

>. The subsequent

If your telephone is set to pulse dialling and you want to use

procedure depends on your PABX. By default, the Recall key

functions that require tone dialling (e.g. remote access to

is preset to a flash time (interruption time) of 90 ms for use

an answering machine), you can change the dialling mode

of new features on public telephone systems. With a

during a call.

connection to a PABX, it may be necessary to change the

* With an open connection: press the star key.

flash time (e.g. 600 ms). To do this, please refer to the

o Enter digits for remote control/data transfer.

operating instructions for your PABX.

The telephone is reset to the original dialling mode by hang-

ing up the handset.