Siemens Euroset 5020: Saving numbers

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006

3

GB

Activating/deactivating handsfree talking

Saving numbers

With this telephone you can also make calls (handsfree

Different telephone settings must be completed with the

mode) or settings without lifting the handset. The best

Set key

? so that they are available permanently.

distance from the microhone for speaking is about 50 cm.

In order to cancel without saving, e. g. after an incorrect

◆ Activating during a call via the handset

entry, replace the handset instead of pressing

? at the

L + a With the Loudspeaker key pressed replace the

end. The original setting is then retained.

handset.

Saving with notebook function

◆ Activating before dialling the number

You can also save phone numbers during a conversation

L Before dialling: hold down the Loudspeaker

with the notebook function.

key until you can hear the dialling tone.

Saving repertory numbers

Deactivating handsfree talking

You can save up to 20 phone numbers (or even functions,

c Lift the handset during the call.

see page 7) on both levels of the repertory keys.

Last number redial

? Press the Set key. (For 2nd memory level, also

The last 5 numbers dialled (up to 32 digits) are saved

press

=.)

automatically. You can retrieve these numbers from the last

: Press the repertory key under which you want

number redial list and dial them again:

to save the repertory number.

A number that has already been saved is

Redialling the last number dialled

shown in the display. If the memory for this

c; Lift the handset and press the last number

repertory key is empty,

z

appears in the display

redial key. The last number dialled is redialled

o Enter the number to be saved (up to 32 digits).

immediately.

or ...

Dialling from the last number redial list

Saving from the calls list (if service is available)

; Without lifting the handset: Press the last

A...C Press the Down/Up key until the desired

number redial key.

number appears in the display.

The last number dialled is displayed. (You can

or ...

leave the last number redial list at any time by

Saving from the redial list:

pressing

>.)

; Press the last number redial key.

A...C Using the Down/Up key, scroll through the list

to the desired number.

A...C If necessary, press the Down/Up key until the

desired number appears in the display.

B Press OK or L key.

After 2 seconds the number is dialled.

To terminate the process:

Lift the handset if you want to talk via the

? Press the Set key.

handset.

Saving during a call

You can also save phone numbers in the same way during a

Dialling using the repertory keys

call (notebook function).

c Lift handset. (If necessary, press = for a 2nd

Note:

level repertory key).

After the 20th digit, any following digits are moved from right to left

: Press repertory key.

in the display.

or ...

Delete all repertory numbers

: Press repertory key. (If necessary, press = for

?1251

a 2nd level repertory key).

Initiate function.

Bc Press OK or L key.

? Press the Set key.

After 2 seconds the number is dialled.

Lift the handset if you want to talk via the

handset.