Binatone MRHB-8805: BEFORE USE OPERATING INSTRUCTIONS CARE AND CLEANING

BEFORE USE

Remove all packaging materials from the

appliance and wash the attachment (4), wipe

the blender body (1) and the power supply

cord with damp cloth and then wipe them dry.

OPERATING INSTRUCTIONS

1. Insert the attachment (4) into the correspond-

ing jack in the blender body (1). Turn the at-

tachment (4) clockwise until it clicks.

2. Make sure that the attachment (4) has been

properly installed before turning the appliance

on!

3. Plug the appliance to an outlet.

4. Immerse the bottom part of the attachment (4) directly in the

bowl where the ingredients to be blended are contained.

Note: to prevent splashing, the blades must be completely

immersed in the ingredients to be blended.

5. Press the low rotation speed controller button (2) or the high

rotation speed controller button (3) to start operation of the

appliance. Hold the button during the blending process.

6. Unplug the appliance from the outlet after use.

7. The appliance can be used for any bowls or containers.

CARE AND CLEANING

1. Always unplug the appliance from the outlet

before cleaning.

2. Disconnect the attachment (4) from the

blender body (1) by turning it anticlockwise.

Wash the attachment (4) with warm water and

dry thoroughly.

3. Wipe the blender body (1) and the power

supply cord (5) with damp cloth and then wipe them dry.

4. Do not use abrasive cleansers when washing the parts of the

appliance.

5. Dry the appliance thoroughly before using.

Note: never immerse the blender body (1) and the power

supply cord (5) in water.

6