Kaiser KCT 69..: EN USAGE

22 

EN  USAGE

COOKING ZONES CONTROL 

MODELS KCT 69... 

Switching ON/ OFF 

After mains voltage is applied the control initialises 

for approx. 1 second before it is ready for operation.  

After a reset all displays and LEDs glow for approx. 1 

second.   

When this time is over all displays and LEDs 

extinguish and the control is in the 

Stand-by

 mode. 

By operating the ON/ OFF key 

1

 the control can be 

turned into the ON-mode.   

The cooking zone displays show a static 

0

. 

If a cooking zone is in the «hot» status, the display 

shows a static 

H

 instead of 

0

.  

The bottom right dot 

2

 is blinking in 1 second 

intervals on all cooking zone displays to indicate that 

no cooking zone is selected at the moment. 

After switching-ON the electronic control remains 

activated for 20 seconds. 

If no cooking zone or timer selection follows within 

this period of time, the electronic control 

automatically switches back into the stand-by-mode. 

Should it recognize key activation other than that, the 

control remains in the stand- by-mode. 

If the child safety feature is active when switching on, 

all cooking zones show 

L

, (LOCKED). (also refer to 

Key lock). 

If the cooking zones are in a «hot» status, the display 

shows 

L

 and 

H

 in alternation.  

The control can only be switched-ON if it identifies 

the ON/ OFF key alone being operated.  

When the Touch Control is ON it can be switched-

OFF at any time by operating the ON/ OFF key. This 

is also valid if the control has been locked (activated 

child safety feature).  

The ON /OFF key has always priority in the switch-

OFF function. 

When the control is ON it automatically switches-

OFF after 20 seconds if no cooking zone or select 

key has been operated within this period of time.  

If case of a cooking zone selection, the automatic 

switch- OFF time is composed of 10 seconds 

deselection time for a cooking zone at setting 

0

 and 

10 seconds switch-OFF time.

1

2