Kaiser KCT 69..: EN

38 

EN 

Countdown timer  

If the control is OFF the standalone-timer can be 

operated by activating the timer key 

1

.  

The timer display shows «00».  



  Operation of the Power-key 

2

 puts the control 

back into the stand-by mode and the stand-

alone-timer will be cut-off. 



  Adjustment range (0-99min), it can be set in 1-

minute steps with any key (

+

) 

3

, starting at 1 

up to 99 (end stop) with the minus-key (

–

) 

4

starting at 99 down to 0 (end stop). 



  Continuous activation of the (

+

) or (

–

) key 

results in a dynamic increase of the 

adjustment speed up to maximum value 

without sound signal. 

When the (

+

) or (

–

) key is released in the meantime, 

the adjustment speed starts again from a (low) initial 

value. 

Adjustment can be made with a continously activated 

(

+

) or (

–

) key or by tip-operation (with sound signal) 

After the timer is set the time runs down according to 

the adjustment. 

When the time is over there is a sound signal and the 

timer display blinks. 

The sound signal will be stopped automatically after 2 

minutes and/ or by operating any key.  

Then the blinking of the timer display stops and the 

display extinguishes. 

2

4 

1 

3