Kaiser KCT 69..: EN

30 

EN 

Safety shutdown 

Safety Guard

(see page 16) 

If during the use of the hob were not made any impact 

on the control, the cooking zones turn off 

automatically for safety reasons after a certain time 

depending on the power level (see table). In this case 

the indicators of the corresponding zones show 

symbols 

H

. 

Protection against unintended switching on 

If the electronic control realizes a continuous 

operation of keys for approx. 10 seconds, it switches 

OFF automatically. The control sends out an audible 

failure signal for 10 seconds, so that the user can 

remove the object which has been mistakingly placed 

onto the operation surface.  

The displays show the failure code «E R 0 3». If the 

failure carries on for more than 10 seconds, only the 

code «E R 0 3» will be displayed as long as the 

failure will be recognized by the electronic control. If 

the cooking zone is in the «hot» status, 

H

 will appear 

on the display in alteration with the failure notice. 

If no cooking zone will be activated within 20 seconds 

after switching-on by means of the Power-key 

4

, the 

control switches back from the ON-condition into the 

Stand-by

-mode.  

When the control is switched-on the ON/ OFF-key has 

priority over all other keys, so that the control can be 

switched-OFF anytime, even in case of multiple or 

continous operation of keys.· 

In the 

Stand-by-

mode a continous operation will not 

be signalized. 

However, before the electronic control can be 

switched-ON again. 

It has to recognize that all keys are not operated. 

3 

1 

2 

4