Kaiser KCT 69..: EN

6

EN 

    H05RR 

– 

F3x2.5 

    H05RR 

– 

F4x1.5

H05RR – F4x1.5 

H05RR – F5x1.5 

H05RR – F3x2.5 

H05RR – F4x1.5 

H05RR – F5x1.5 

NSTALLATION  INSTRUCTIONS 

ELECTRICAL CONNECTION

Before connecting the cooking hob to the mains power 

supply, make sure that: 



  the plant characteristics are such as to follow 

what is indicated on the matrix plate placed at the 

bottom of the working area, 



  the mains supply has an efficient ground 

connection complying with all applicable laws and 

regulations. 

Correct grounding is a legal requirement. If the appliance 

is not pre-fitted with a power cable and/ or plug, use only 

suitable cables and plugs capable of handling the power 

specified on the appliance's data plate and capable of 

resisting heat. The power cable should never reach a 

temperature 50 °C above ambient temperature at any 

point along its length.  

If the appliance is to be connected directly to mains 

terminals, fit a switch with minimum aperture of 3 mm 

between the contacts. Make sure that the switch is of 

sufficient capacity for the power specified on the 

appliance's data plate, and compliant with applicable 

regulations. The switch must not break the yellow-green 

earth wire. The socket or switch must be easily reachable 

with the cooking hob fully installed. 

Attention!

 The manufacturer declines all 

responsibility for damage or injury if the 

above instructions and normal safety 

precautions are not respected